Re: New Imon remote: Imon Mini: 15c2:0041

[David R. <da...@da...>]

Thanks for your responses guys ;-)

I tried in one of the attempts, as I read somewhere, to block the device 
being capted by hal, and i was able to do it adding a rule on
/usr/share/hal/fdi/preprobe/20thirdparty , file: lirc.fdi

Instead of having:
<match key="info.product" contains_ncase="saa7134 ir">

I changed it to:
<match key="info.product" contains_ncase="15c2:0041">

So hal doesn't enable it as being an HID device.

You said to add device list entries for it similar to the 15c2:ffdc , 
you mean tweaking the imon knob configuration and see what happens?

Also, the device says to be a Soundgraph one. What i bought was this:
http://www.soundgraph.com/Eng_/Products/imon23.aspx?topMenu=2&subMenu=2&leftMenu=23

But, as you posted, Antec builds it exactly the same as this link you 
posted:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811999190

It's exactly the same (same accesory, like the usb cable extend with 
clip) even the box looks the same way :-D

I'll do some other test and see what happens.

Thanks again for your time.





Jarod Wilson escribió:
> On Wed, 2008-11-05 at 23:16 -0500, Jarod Wilson wrote:
>   
>> On Sat, 2008-10-25 at 20:19 -0700, David Rando wrote:
>>     
>>> Hello and Greetings to the list, first time here, long read recently ;-)
>>>
>>> I got an Imon Mini remote and receiver using usb. I'm trying to run it on
>>> Ubuntu 8.04 (and actually, on ubuntu 8.10) but i'm not able to do it.
>>>
>>> The device is recognized as an HID Mouse as you can see in this dmesg line:
>>> input,hidraw3: USB HID v1.01 Mouse [HID 15c2:0041] on usb-0000:00:1d.2-2
>>>
>>> If you do an lsusb, the device is recognized as a Soundgraph brand, but not
>>> any model with there.
>>>
>>> I've being searching and searching on google, this list, sites,
>>> instructions... as getting some response from the device doing a cat to its
>>> inputX device, or to the hiddev0 one, it's working. I've being following
>>> instructions about using the devinput driver, or inputlirc, with no results.
>>>
>>> Also, i could capture some buttons using irrecord and usinb the macmini
>>> driver, but it's a mess.
>>>
>>> Do you know what can i do to make it run?
>>>       
>> Probably want to make the hid driver not bind to it, and add device list
>> entries for it similar to the 15c2:ffdc, which in my case, is a
>> display-less iMon Knob.
>>     
>
> Also, can you clarify exactly what device this is? Is it a
> SoundGraph-branded one or an Antec-branded one? If Antec, is it either
> of these?:
>
> http://www.newegg.com/Product/Product.aspx?Item=N82E16811999190
> http://www.newegg.com/Product/Product.aspx?Item=N82E16811999191
>
>
>
>