Re: lirc-0.8.4pre1 - Module.symvers not created in /drivers/lirc_serial

[<li...@ba...>]

Hi!

metoo "mis...@jo..." wrote:
[...]
> Today I had a rather hard time to compile the lirc modules on a debian
> sid 32-bit using the snapshot lirc-0.8.4pre1 .
>
> Using a serial device, it turned out that the Module.symvers
> in sourcepath/drivers/lirc_serial/... was created empty, while it was
> created in sourcepath/drivers/lirc_dev/... correctly.
>
> The workaround was to copy .../drivers/lirc_dev/Module.symvers
> to .../drivers/lirc_serial/Module.symvers and change

The LIRC Makefile is doing this for Modules.symvers.
I'm not sure why it's Modules.symvers and not Module.symvers.
Now also Module.symvers should be copied.
Could you try with current CVS again?

Christoph