Re: lirc-0.8.3pre3

[Mario G. <mar...@gm...>]

Den Sun, 27 Apr 2008 20:05:00 +0200, skrev Christoph Bartelmus:

> Hi,
> 
> I have put a last pre-release online. If there are no problems found
> then this will be released as the next official version. This version
> should work with all 2.6 kernels up to 2.6.25.
> 
> http://lirc.sourceforge.net/software/snapshots/lirc-0.8.3pre3.tar.bz2
> 
> Christoph
> 
> 
-------------------------------------------------------------------------
> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't
> miss this year's exciting event. There's still time to save $100. Use
> priority code J8TL2D2.
> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/
javaone

Hi,

I'm having a bit of trouble with the pre-release. I'm using a CommandIR 
USB IR controller on Mandriva 2008.1, (2.6.24). It compiles cleanly but 
as soon as I try to attach a client, (irw for instance), the module 
thinks that the device is unplugged. Here's a snippet from my logfile:

   kernel: lirc_dev: IR Remote Control driver registered, major 61 
   kernel: usbcore: registered new interface driver commandir
   kernel: lirc_dev: lirc_register_plugin: sample_rate: 20
   kernel: lirc_cmdir: freq set to 38000Hz
   kernel: usb 4-1: new full speed USB device using ohci_hcd and address 4
   kernel: usb 4-1: configuration #1 chosen from 1 choice
   kernel: /root/lirc/drivers/lirc_cmdir/commandir.c: CommandIR USB 
device now attached to commandir2
   kernel: /root/lirc/drivers/lirc_cmdir/commandir.c: commandir2 reset
   kernel: /root/lirc/drivers/lirc_cmdir/commandir.c: COMMANDIR2:
   kernel:  TX Enabled: 1, 2, 3, 4
   kernel:  RX: commandir0
   kernel:  LCD: commandir0

And then when I start irw:

   kernel: lirc_cmdir: device is unplugged


After this there is no response to anything.

regards
mario;