|
From: Daniel M <ra...@us...> - 2007-04-10 07:19:53
|
Hi Joseph, Can you tell me what make and model of mce device you have. Does the device start to blink when you run the irsend command. If it blink, how close to the ir-window of your device have you placed the emitter. The signal strength when using the original emitters just enough to handle a centimeter or two at max. Also some devices needs to have the ir-signal repeated at least two or three times in order to be recognized as a valid command, there should be a repeat value for this in your remote configuration file. /Daniel On Mon, 2007-04-09 at 18:03 -0400, Joseph Kezar wrote: > I added a --with-tranmitter to my ./configurere and recompiled lirc . > I dont think my problem has anything to do with carrier frequency. I > cannot even blast my Sanyo TV to power off. And still cant power off > my SAE8000 compatible SA3200 cable box. > > I was able to control the device with lirc_serial. But I no longer > have that device. My mceusb2 device specifically is: > [145654.967664] lirc_mceusb2: Philips eHome USB IR Transciever and > Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.28 $ > [145654.967670] lirc_mceusb2: Daniel Melander <li...@ra...>, > Martin Blatter <mar...@ya...> > [145655.178130 ] lirc_dev: lirc_register_plugin: sample_rate: 0 > [145655.179210] lirc_mceusb2[7]: SMK eHome Infrared Transceiver on > usb4:7 > [145655.179953] usbcore: registered new driver lirc_mceusb2 > > > On 4/9/07, Joseph Kezar <jos...@gm...> wrote: > According to past discussion in this list, people have been > able to use the transmit function of the mceusb2. I > downloaded the latest from cvs, I recompiled the kernel > module, copied the tools/ and daemons/ to where they should > go. rmmod lirc_mceusb2 and lirc_dev, reloaded with modprobe > and restarted the new lircd daemon. > > Everything works for receiving signals. Sending still does > nothing against my Scientific Atlanta 3200 Explorer. The > carrier frequency I have set is for the SAE8000, of 56000. > > Any idea why: irsend SEND_ONCE SAE8000 POWER > does nothing? > > Thanks, > Joe K > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV |