From: Dominik 'R. M. <do...@gr...> - 2007-01-28 15:32:01
|
Hello. I have a TV card that works with bttv option card=54: Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] Unfortunately, the gpio module doesn't seem to support this card. 56 is the closest match, but after loading bttv with card=56, I get no sound. I suspect it is only a matter of specifying correct parameters for gpio (such as gpio_mask), but I have no idea where to find them. Here's a bttv module log from the kernel: Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 17, latency: 32, mmio: 0xe5000000 bttv0: using: Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] [card=54,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00d4dfe0 [init] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) bttv0: FlyVideo Radio=yes RemoteControl=yes Tuner=5 gpio=0xd4dfe0 bttv0: FlyVideo LR90=yes tda9821/tda9820=no capture_only=no bttv0: using tuner=5 tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 . ok Any clues are most welcome. Regards, R. -- Fedora Extras contributor http://fedoraproject.org/wiki/DominikMierzejewski Livna contributor http://rpm.livna.org MPlayer developer http://mplayerhq.hu "Faith manages." -- Delenn to Lennier in Babylon 5:"Confessions and Lamentations" |