From: lvs@SoftHome.net - 2006-07-02 11:07:27
|
Hi Managed to solve this myself :) modprobe lirc_serial type=2 works Lucas > Hi. > > Pretty frustrated right now, so I really hope someone can shed some > light... > > I have a homebrew ir (bought of e-bay, not built myself), which I had used > now for a year with lirc 0.7 and kernel 2.6.7. It worked smooth, and > briliantly. > > I recently upgraded my theatre box to kernel 2.6.17, and lirc 0.8. > For some reason this combination does not seem to get any signals from my > ir. > > Used both gentoo, and debian with the same result > > Compiled lirc_serial, kernel is custom compiled, and the serial modules > are not installed (confirmed via dmesg, and /dev/ttySX does not exist), > but just in case i had also used setserial uart none command. > > when I load lirc_serial I get: > > lirc_dev: IR Remote Control driver registered, at major 61 > lirc_serial: auto-detected active high receiver > lirc_dev: lirc_register_plugin: sample_rate: 0 > > looks good, > > lsmod shows lirc_serial and lirc_dev > > I can start lircd, and it starts with no error messages. > I can cat /dev/lirc0, and it just sits there, i can press buttons on my > remote until i am blue..., the same with mode2. > > So, it looks like lirc_serial, and lirc_dev, and lircd is all ok, and > functioning, but they don't seem to get any ir signal from my hardware.... > > Any suggestions on where to go next ? > > If I do have to replace the serial device, please can anyone suggest one > (would prefer serial, as my usb ports are used) > > tried kernel 2.6.16/15/14 with same result. > > Regards > Lucas > > > > > > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job > easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > |