|
From: John B. <ire...@gm...> - 2006-02-06 20:48:34
|
Thanks! I don't think I should be playing around with ttyS0, since that's got a serial cable that's been changing channels just fine on my set top box. Would I put this in /etc/modprobe.d/lirc? (And would /etc/init.d/irda-utils or /../irda-setup play into this at all?) Thanks again! On 2/6/06, francis belanger <fra...@gm...> wrote: > > The quick answer is that you need to disable standard serial port, try > that before loading your driver: > > setserial /dev/ttyS0 uart none > setserial /dev/ttyS1 uart none > > and try it again > > > > On 2/6/06, John Brooks <ire...@gm...> wrote: > > > > Hi, all. I've been trying to look into this a little further before > > posting, and here's what I have. > > > > I am using Ubuntu Breezy Badger with the 2.6.12-10-k7 kernel. I > > configured, then did make and make install for lirc 0.8.0. > > > > I created /etc/modprobe.d/lirc: > > ### > > install lirc_sir /usr/local/sbin/smcinit; /sbin/modprobe > > --ignore-install lirc_sir > > alias char-major-61 lirc_sir > > options lirc_sir io=3D0x3f8 irq=3D4 > > ### > > > > It does not come up with lirc_sir at startup, though, and when I go to > > modprobe it, I get the following error (and corresponding output in dme= sg) > > > > sh: /usr/local/sbin/smcinit: No such file or directory > > FATAL: Error inserting lirc_sir > > (/lib/modules/2.6.12-10-k7/misc/lirc_sir.ko): Device or resource busy > > FATAL: Error running install command for lirc_sir > > > > from dmesg: > > lirc_dev: IR Remote Control driver registered, at major 61 > > lirc_sir: no version for "lirc_unregister_plugin" found: kernel tainted= . > > lirc_dev: lirc_register_plugin: sample_rate: 0 > > lirc_sir: i/o port 0x03f8 already in use. > > > > According to fuser, irattach has grabbed ttyS1 yet again: > > > > root 7655 0.0 0.0 1544 492 ? S 14:12 0:00 > > /usr/sbin/irattach /dev/ttyS1 none -s > > > > I'm assuming that's why 0x3f8 is busy. > > > > Can anyone help me out here? I'm really lost... thanks. > > > > |