From: Eli C. <zy...@ve...> - 2005-06-23 19:50:54
|
Thu, 23 Jun 2005 15:12:37 -0300 | Luis Felipe Strano Moraes <lui...@gm...> > Hi, > > I'm trying to configure lirc here on my playtv pro, but I'm having problems. > I'm running Gentoo, using vanilla kernel 2.6.11.11. After installing lirc 0.7.1, > loading the module (lirc_i2c) and running /etc/init.d/lircd start , I have the > following files on /dev : > > crw-rw-rw- 1 root root 61, 0 Jun 20 19:58 lirc > crw-rw-rw- 1 root root 61, 0 Jun 20 19:58 lirc0 > srw-rw-rw- 1 root root 0 Jun 23 15:09 lircd > > I try to run irw, but it just exits. When I try to run it again, I get > this message: > connect: Connection refused > > And this is what I have on my log : > > Jun 23 15:08:19 [lircd-0.7.1] lircd(pixelview_bt878) ready > Jun 23 15:08:43 [lircd-0.7.1] accepted new client on /dev/lircd > Jun 23 15:08:43 [lircd-0.7.1] could not open /dev/lirc0 > Jun 23 15:08:43 [lircd-0.7.1] default_init(): No such device_ > Jun 23 15:08:43 [lircd-0.7.1] caught signal > > The first line is when I run /etc/init.d/lircd start, and the others are > when I try to run irw. Lircd closes after that. > > What might be happening ?? Is there something special on the kernel > configuration that I'm missing ??? > > Thanks, > --lf > After getting the modules loaded properly, you really shouldn't have two lirc character devices in /dev with 61,0. Try unloading the modules first, then rm -rf /dev/lirc mkdir /dev/lirc mknod /dev/lirc/0 d 61 0 then modprobe the correct modules (lirc_gpio apparently) and lircd -d /dev/lirc/0 then test out irw. -- Thu:Jun:23:05 Eli Crumrine |