xorg.conf and lircmd

[Yan S. <ya...@ca...>]

Is there anything special I need to do to get lircmd running with xorg 
instead of XFree?  I'm running Fedora Core 2 with a generic 2.6.9 kernel.

I have my lircd.conf and lircmd.conf - snippets below - and the 
xorg.conf set up as per the lirc.org page, but the mouse is not recognized.

lircd.conf:

           up                       0x0000000000004AB5
           left                     0x000000000000CE31
           down                     0x0000000000000AF5
           right                    0x000000000000EE11
           ok                       0x0000000000003AC5

lircmd.conf:

PROTOCOL IntelliMouse
ACCELERATOR 2 30 5
MOVE_N  * up
MOVE_E  * right
MOVE_S  * down
MOVE_W  * left
BUTTON1_CLICK * OK

xorg.conf:

Section "ServerLayout"
         Identifier     "Default Layout"
         Screen      0  "Screen0" 0 0
         InputDevice    "Mouse0" "CorePointer"
         InputDevice    "LIRC-Mouse"
         InputDevice    "Keyboard0" "CoreKeyboard"
EndSection


Section "InputDevice"
         Identifier  "LIRC-Mouse"
         Driver      "mouse"
         Option      "Device" "/dev/lircm"
         Option      "Protocol" "IntelliMouse"
         Option      "SendCoreEvents"
         Option      "Buttons" "5"
         Option      "ZAxisMapping" "4 5"
EndSection

The modules are loaded, I'm running both lird and lircmd, but ther is no 
  movement of the cursor.

Mode2 shows data flowing...

Is there any way to test lircmd?  Anything else I can look at to debug this?

Thanks,

--Yan

-- 
         o
      /\ /_       o__
    o*  ~(_)      ,>/'_      o__
Yan Seiner, PE  (_)\(_)     ,>/'_   o__     o__
Cardinal Engineering, Inc. (_)\(_)  ,>/'_   ,>/'_
http://www.cardinalengineering.com (_)\(_) (_)\(_)
spam killer code kpwq1jkcsEzdx39gnkVvgycd15ayqq