dual lirc setup problems

[<li...@co...>]

I've been trying to get my IR blaster working with my satellite dish. 
I've been having a few problems.

I've kinda been following these directions:
http://losdos.dyndns.org:8080/public/mythtv-info/MythTV_DISH_IR_LED_TX_via_Modified_LIRC.html

I have a mythTV box setup using Jarod's FC2 guide.  This isn't a myth
question though :)

I wanted to set up my blaster on char-major-61 since that was pretty
straight forward.  I have the blaster working.  Here's the relavant lines
in my /etc/modprobe.conf:

alias char-major-61 lirc_sir
options lirc_sir irq=4 io=0x3e8

these are the lines in my /etc/rc.local files:

setserial /dev/ttyS2 uart none
/sbin/modprobe lirc_sir
/usr/local/sbin/lircd

The blaster works fine.

The problem arises when I try to have a second lirc running.  I'm
following the guide I mentioned above.  I get nothing happening.  The
second lirc is trying to run my hauppauge remote.  I figured it would be
easier to run my hauppage remote on char-major-72 since I knew it worked
(it works if I follow Jarod's guide)

This is what happens when I try to run irw:
[root@media root]# /usr/local/ledxmit/sbin/ledxmit-ledxmitd -n
ledxmitd 0.7.0pre5: ledxmitd(hauppauge) ready
ledxmitd 0.7.0pre5: accepted new client on /dev/ledxmitd
ledxmitd 0.7.0pre5: could not open /dev/ledxmit
ledxmitd 0.7.0pre5: default_init(): Device or resource busy
ledxmitd 0.7.0pre5: caught signal
Terminated

This is the configure command I ran when I compiled lirc: ./configure
--program-prefix=ledxmit- --prefix=/usr/local/ledxmit --with-major=72
--with-driver=hauppauge

This is the results of lsmod:

Module                  Size  Used by
bttv                  141837  0
video_buf              17221  1 bttv
v4l2_common             5057  1 bttv
btcx_risc               3785  1 bttv
ledxmit_i2c             5892  1
ledxmit_dev             9480  2 ledxmit_i2c
snd_emu10k1            88521  0
snd_rawmidi            21733  1 snd_emu10k1
snd_pcm                83529  1 snd_emu10k1
snd_timer              25413  1 snd_pcm
snd_seq_device          6473  2 snd_emu10k1,snd_rawmidi
snd_ac97_codec         58821  1 snd_emu10k1
snd_page_alloc          8393  2 snd_emu10k1,snd_pcm
snd_util_mem            3521  1 snd_emu10k1
snd_hwdep               6597  1 snd_emu10k1
snd                    45477  8
snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep
soundcore               7713  1 snd
lirc_sir               16096  1
lirc_dev               10248  2 lirc_sir
msp3400                23204  0
saa7115                10244  0
tuner                  16857  0
tveeprom                8736  0
ivtv                  793188  2
i2c_algo_bit            7497  2 bttv,ivtv
i2c_core               17345  7
bttv,ledxmit_i2c,msp3400,saa7115,tuner,tveeprom,i2c_algo_bit
videodev                7105  2 bttv,ivtv
autofs4                20677  0
smbfs                  61881  4
sunrpc                141861  1
via_rhine              19273  0
mii                     3777  1 via_rhine
floppy                 54001  0
sg                     28513  0
scsi_mod              105360  1 sg
dm_mod                 47317  0
joydev                  7169  0
uhci_hcd               28505  0
ehci_hcd               27973  0
button                  4825  0
battery                 7117  0
asus_acpi               9177  0
ac                      3533  0
nvidia               4808532  12
md5                     3905  1
ipv6                  217349  18
ext3                   96937  4
jbd                    66521  1 ext3

Does anyone have any ideas?
Thanks in advance!
Jeff