From: Paul M. <pam...@ui...> - 2004-10-05 13:38:28
|
When you load lirc_atiusb, does it recognize your remote? If not, try adding the vendor/product id's to the usb device id table in lirc_atiusb.c and recompile/etc. Also, load lirc_atiusb with debug=1. -Paul On Monday 04 October 2004 8:40 pm, John Davin wrote: > Hi, > > I have a Niveus USB remote, which is basically the same as the ATI > USB Remote Wonder. My remote: > http://www.jdr.com/interact/item.asp?itemno=PC-REMOTE-USB > > I followed these instructions for getting lirc to work with the ATI > remote: > http://fedoranews.org/contributors/youssef_makki/remotewonder/ > > But it doesn't work - irw does not print anything when I press keys on the > remote. And I have no idea what to try now. > > The remote is detected in USB: # lsusb > Bus 001 Device 008: ID 0bc7:0005 X10 Wireless Technology, Inc. > > > I installed the lirc package from the webpage and the conf files. > > Tests: > > # lircd --nodaemon > lircd 0.7.0pre4: lircd(atiusb) ready > > > Then when I run lircd, and then irw, irw just quits and kills lircd. When I > run lircd as: lircd --device /dev/lircm > then irw stays running, but pressing buttons on my remote does not cause > any output at all. > > I have these devices: # ll /dev/lirc* > crw-r--r-- 1 root root 61, 0 Oct 4 12:05 /dev/lirc > srw-rw-rw- 1 root root 0 Oct 4 21:04 /dev/lircd= > prw-r--r-- 1 root root 0 Oct 4 12:06 /dev/lircm| > > > but only /dev/lircm seems to work: > # cat /dev/lirc* > cat: /dev/lirc: No such device or address > cat: /dev/lircd: No such device or address > > > Any ideas? Help would be greatly appreciated. > > -John > > > ------------------------------------------------------- > This SF.net email is sponsored by: IT Product Guide on ITManagersJournal > Use IT products in your business? Tell us what you think of them. Give us > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more > http://productguide.itmanagersjournal.com/guidepromo.tmpl -- Paul Miller, Grad Student Mechanical Engineering-Control Systems University of Illinois at Urbana-Champaign Control Systems Lab: EL-237A, (217) 244-8573 Email: pam...@ui... Home: (217) 898-5367 |