From: Joel D. Z. <xw...@au...> - 2004-09-07 13:57:58
|
I'm trying to get lirc running with a FC1/Hauppauge PVR350 mythtv setup and I'm stumped with the following problem. I've seen several posts that address this issue but unfortunately none of them ever seem to be resolved. I see the following when I "modprobe lirc_i2c": ***cut from /var/log/messages*** Sep 6 22:31:37 localhost kernel: bttv: driver version 0.7.107 loaded Sep 6 22:31:37 localhost kernel: bttv: using 4 buffers with 2080k (8320k total) for capture Sep 6 22:31:37 localhost kernel: bttv: Host bridge is Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge Sep 6 22:31:37 localhost insmod: /lib/modules/2.4.22-1.2197.nptl_51.rhfc1.at/kernel/drivers/media/video/bttv. o: init_module: No such device Sep 6 22:31:37 localhost insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg Sep 6 22:31:37 localhost insmod: /lib/modules/2.4.22-1.2197.nptl_51.rhfc1.at/kernel/drivers/media/video/bttv. o: insmod bttv failed Sep 6 22:31:37 localhost modprobe: modprobe: Can't locate module rivatv I've read that lirc requires the bttv module for auto-detection which must be why it's trying to load (and I know my PVR350 uses the ivtv driver). I've tried different versions of lirc and bttv, I've played around with /dev/video, /dev/video0, and /dev/lirc (not really knowing what I'm doing...) If it helps, here is my modules.conf. /etc/modules.conf ******** path[toplevel]=/lib/modules/`uname -r`/updates # default path path[toplevel]=/lib/modules/`uname -r` #alias char-major-81-1 bttv #alias char-major-81 bttv alias char-major-61 lirc_i2c alias eth0 b44 alias usb-controller usb-uhci alias usb-controller1 ehci-hcd # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF verion 1.0.5 --- alias char-major-116 snd alias char-major-14 soundcore alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss alias snd-card-0 snd-intel8x0 alias sound-slot-0 snd-intel8x0 # --- END: Generated by ALSACONF, do not edit. --- # ivtv modules setup for PVR-350 composite video out alias char-major-81 videodev alias char-major-81-0 ivtv options ivtv ivtv_debug=1 mpg_buffers=90 #options ivtv dec_yuv_buffers=20 # <-- Not needed anymore for my 350 w/ivtv 0.1.9 options saa7127 enable_output=1 output_select=0 options tuner type=2 # NTSC tuner options msp3400 once=1 simple=1 add below ivtv msp3400 saa7115 saa7127 tuner add above ivtv lirc_dev lirc_i2c #add above ivtv ivtv-fb ******** Thanks for any help or suggestions. Joel |