Re: Adding support for FLYVIDEO 3000 to LIRC

[Gerd K. <kr...@by...>]

Pearless <Dou...@pe...> writes:

> I: Bus=0001 Vendor=5168 Product=0138 Version=0001
> N: Name="saa7134 IR (LifeView FlyVIDEO30"
> P: Phys=pci-0000:02:09.0/ir0
> H: Handlers=kbd 
> B: EV=100003 
> B: KEY=c0304 100000 0 0 0 0 1 10000 2 1e0001 7bb80 0 0 

> lircd --device=/dev/input/event<n>

> but it is not clear what <n> is !

First do "insmod evdev", you need that anyway.

Then check again, the H: line should list the correct device, like
here:

I: Bus=0018 Vendor=0000 Product=0000 Version=0000
N: Name="i2c IR (Hauppauge)"
P: Phys=i2c-4/4-0018/ir0
H: Handlers=kbd event5 
                ^^^^^^
B: EV=3 
B: KEY=c0000 201080400000000 0 302008000 18000004801 9e00000007bb80 0 

Note that lircd also needs the -driver=dev/input switch, otherwise it
expects the device speak the lirc driver API which it doesn't ;)

HTH,

  Gerd