From: Wagga W. <Wag...@gm...> - 2004-02-17 20:16:01
|
thanks for the link, i've read it and now know that with my setup the sony remote will not work (at least until i find a store to buy a 38khz ir-receiver) as i mentiond in my last posting i also posess a "Panasonic Wireless Remote Control Unit" when i run mode2 with that remote i get slightly better results like the following: 2338237 3631 1727 548 330 547 1243 520 350 464 434 536 355 453 439 561 314 520 386 558 322 500 388 451 454 515 352 463 462 414 1326 471 425 527 374 456 436 546 328 507 358 495 423 504 1261 504 386 505 387 476 1276 532 338 529 371 467 435 521 358 480 413 516 367 515 369 467 425 497 391 486 1280 507 383 492 1273 562 328 524 355 470 425 553 335 453 449 427 1330 497 396 462 1289 519 1271 536 331 516 371 548 1236 541 for pressing the play button once, all values seem to be a little to short header < 4000 and only some pulses and spaces are between 800 and 1600, when i run irrecord i still get the irrecord: no data for 10 secs, aborting irrecord: gap not found, can't continue error. is it possible to get it to work with that values? if not i'll try to get a 38khz ir-receiver, but the earliest possibility will be in about 2 weeks. thanks again for your help manuel p.s. if that mail again starts a new thread (like the last did) can anyone give me advise how to send mails to the mailinglist that they show up in the right (existing) thread thx once again > manuel, > > I have some info on mode2 numbers here: > http://www.turbobit.com/lirc2.html. > > I think your 33khz receiver maybe a problem. > Hope that helps. > > Typically pulses and spaces are around 800 to 1600 in size. > Header(2 bits) are typically longer 4000-40000. > > -- GMX ProMail (250 MB Mailbox, 50 FreeSMS, Virenschutz, 2,99 EUR/Monat...) jetzt 3 Monate GRATIS + 3x DER SPIEGEL +++ http://www.gmx.net/derspiegel +++ |