From: Larry O. <la...@sc...> - 2003-07-29 13:46:27
|
I'm trying to setup LIRC on a Kworld TV878RF-PRO. If anyone has this stuff working on this card, please share your modules.conf, lircd.conf, ~/.lircrc, and any gotchas you may know about. I can load the driver w/out error w/ the following command: modprobe lirc_gpio gpio_mask=0xff00 debug=1 here's the syslog message: Jul 28 08:13:45 media kernel: lirc_dev: IR Remote Control driver registered, at major 61 Jul 28 08:13:45 media kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 Jul 28 08:13:45 media kernel: lirc_gpio (0): driver registered Then i run lircd (w/out error) and the log reads this: Jul 28 08:14:44 media lircd 0.7.0pre1: lircd(kworld) ready OK, Now I should be able to run irw, start pressing buttons on my remote and get some messages, right? I get nothing on standard out. However, syslog shows this: .... Jul 28 08:19:36 media kernel: lirc_gpio (0): gpio_val is 3ffffc Jul 28 08:19:36 media kernel: lirc_gpio (0): code is ff Jul 28 08:19:36 media kernel: lirc_gpio (0): gpio_val is 3ffffc Jul 28 08:19:36 media kernel: lirc_gpio (0): code is ff Jul 28 08:19:36 media kernel: lirc_gpio (0): gpio_val is 3ffffc Jul 28 08:19:36 media kernel: lirc_gpio (0): code is ff Jul 28 08:19:36 media kernel: lirc_gpio (0): gpio_val is 3ffffc Jul 28 08:19:36 media kernel: lirc_gpio (0): code is ff Jul 28 08:19:36 media kernel: lirc_gpio (0): gpio_val is 3ffffc Jul 28 08:19:36 media kernel: lirc_gpio (0): code is ff Jul 28 08:19:36 media kernel: lirc_gpio (0): gpio_val is 3ffffc Jul 28 08:19:36 media kernel: lirc_gpio (0): code is ff Jul 28 08:19:36 media kernel: lirc_gpio (0): gpio_val is 3f89fc Jul 28 08:19:36 media kernel: lirc_gpio (0): code is 89 Jul 28 08:19:37 media kernel: lirc_gpio (0): gpio_val is 3f89fc Jul 28 08:19:37 media kernel: lirc_gpio (0): code is 89 Jul 28 08:19:37 media kernel: lirc_gpio (0): gpio_val is 3f89fc Jul 28 08:19:37 media kernel: lirc_gpio (0): code is 89 Jul 28 08:19:37 media kernel: lirc_gpio (0): gpio_val is 3ffffc ..... I'm guessing that the lircd.conf for the Kworld is wrong. I'm using the one from the website. Thanks Alot, larry |