From: Matthew B. <ma...@ss...> - 2003-07-06 12:23:03
|
This problem is gone with the latest CVS version of the code so I was able to get it working Thanks Matt Quoting Leonid Froenchenko <lf...@il...>: > 1. /dev/lirc have nothing to do with this particular driver (it have no > kernel module) O.K, I thought it was just a shortcut to tell lircd which serial port to look at. Kinda like /dev/dvd and whatnoew > 2. during configure you should choose creative_infra driver and not any > other creative I did that > 3. you should use lirc.conf.infracd and not lirc.conf.creative (this is > for another device) In the 6.6 version that I had started with, htere was no irfracd, just a creative and it is the same file as the cvs version's .infracd > 4. you must configure your cd to work thru scsi emulation (ide-scsi). I don't get this at all. I don't have the creative cd > 5. driver has been tested with it's original remote. I do got report > about possibility to > receive from others remotes, but have not tested it and have no > config file for any. > > I hope this will help > > > Matthew Bettencourt wrote: > > >I am new to lirc but I think I ahve done everything it has suggested. First > of > >all, I got a creative infra receiver pc-dvd remote thingy. I tested it > under > >w2k and it worked fine using com2 on a laptop. I try to get it setup > under > >linux and I have no luck. It is a stock RH9 system and I was using 0.6.6 > rpms. > >Here is what I did: > > > >1) I copied the lirc.conf.creative to /etc/lirc.conf, > >2) I started lircd -n, and irw and got nothing out. 3) I noticed the > /dev/lirc > >was a link to ttyS0 and thought com2=ttyS1, right?? I changed the link to > >ttyS1, restarted lircd and then restarted irw and then got a signal error > from > >the lircd window. I noticed that a setserial yields a uart on com2 as > unknown. > > Does that mean that that port is not available or is it just not > configured?? > >I am stuck now, Has anyone gotten to the same point I am at and worked > past it? > >Thanks > >Matt > > > > > >------------------------------------------------- > >This mail sent through IMP: http://horde.org/imp/ > > > > > >------------------------------------------------------- > >This SF.Net email sponsored by: Free pre-built ASP.NET sites including > >Data Reports, E-commerce, Portals, and Forums are available now. > >Download today and enter to win an XBOX or Visual Studio .NET. > >http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01 > > > >. > > > > > > > > -- > --------------------------------------------------------- > > "Rise and conquer, let the infidels burn" > > > This message may contain confidential, proprietary or legally privileged > information. The information is intended only for > the use of the individual or entity named above. If the reader of this > message is not the intended recipient, you are hereby > notified that any dissemination, distribution or copying of this > communication is strictly prohibited. If you have received this > communication in error, please notify us immediately by telephone, or by > e-mail and delete the message from your computer. > > > > > ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ |