Re: lacie BIGGEST FW800

[t35t0r <t3...@gm...>]

Hrmm this is strange. I have the exact same drive with the exact same
FW800 card. Is your FW800 card in a 64bit pci-x slot or a regular
32bit slot? Do you have any FW400 ports you can try it with? Have you
upgraded the firmware on the drive to the latest version? Try using
the latest vanilla kernel with these options all built into the
kernel:

<*> IEEE 1394 (FireWire) support
Subsystem Options
  [*]   Build in extra config rom entries for certain functionality
 <*>   OHCI-1394 support
 ---   Protocol Drivers
     <*>   SBP-2 support (Harddisks etc.)
         [*]     Enable Phys DMA support for SBP2 (Debug)
     <*>   Raw IEEE1394 I/O support

Also you might want to use the CFQ disk scheduler even with USB2.

On 7/20/05, Hugh Dixon <hu...@zo...> wrote:
> Hi list+Andreas
> I get the following errors when attempting to do make modules after
> having downloaded "trunk" ver.1315 tarball and put it into the 2.6.12.3
> source tree in place of drivers/ieee1394/