Re: [Linux-uvc-devel] Ekiga and QuickCam Fusion

[Dariusz D. <dar...@gm...>]

try with the latest cvs ekiga snapshots.. 

it works for me with this webcam. 

dariusz dworznik

On Thursday 23 February 2006 17:35, Aaron VanDevender wrote:
> I am trying to get a QuickCam Fusion to work with Ekiga. I'm using rev
> 21 of the uvc driver and Ekiga Beta2 (2006.02.13), on FC4
> (kernel-2.6.15-1.1831_FC4). I've seen some people on the list get
> combination to work (Mikael), so I'm wondering what I'm doing wrong.
>
> Plugging in the device gives me from dmesg:
>
> usb 1-2: new high speed USB device using ehci_hcd and address 14
> 14:3:1: cannot set freq 0 to ep 0x86
> 14:3:2: cannot set freq 0 to ep 0x86
> 14:3:3: cannot set freq 16000 to ep 0x86
> uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c1)
> usbcore: registered new driver usbvideo
> USB Video Class driver (v0.1.0)
> uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32.
> uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -32.
> uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110.
> uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110.
>
> replugging gives me:
>
> usb 1-2: new high speed USB device using ehci_hcd and address 15
> uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c1)
> 15:3:1: cannot set freq 0 to ep 0x86
> 15:3:2: cannot set freq 0 to ep 0x86
> 15:3:3: cannot get freq at ep 0x86
>
> If I try and reload the module, I get
>
> uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c1)
> uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110.
> uvcvideo: Failed to initialize the device (-5).
> usbcore: registered new driver usbvideo
> USB Video Class driver (v0.1.0)
>
> The blue light never comes on. In fact, I didn't even realize the blue
> light existed until Laurent mentioned it in a post to Nick, and I
> confirmed it in the manual. It could be that this unit is dead out of
> the box, as I don't have any windows boxes that I can test it on. But I
> think it is more likely that I just need to tweak the driver somehow.
>
> dmesg does not report that any sources (MJPEG or uncompressed) are
> available. When I load up ekiga, it sees a device (/dev/video1) but
> cannot open it. Instead it gives me an error that says:
>
> "Your video driver doesn't support the requested video format."
>
> If anyone has any suggestions for getting this to work, I would
> appreciate it.