[Linux-uvc-devel] Ekiga and QuickCam Fusion

[Aaron V. <si...@ne...>]

I am trying to get a QuickCam Fusion to work with Ekiga. I'm using rev
21 of the uvc driver and Ekiga Beta2 (2006.02.13), on FC4
(kernel-2.6.15-1.1831_FC4). I've seen some people on the list get
combination to work (Mikael), so I'm wondering what I'm doing wrong.

Plugging in the device gives me from dmesg:

usb 1-2: new high speed USB device using ehci_hcd and address 14
14:3:1: cannot set freq 0 to ep 0x86
14:3:2: cannot set freq 0 to ep 0x86
14:3:3: cannot set freq 16000 to ep 0x86
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c1)
usbcore: registered new driver usbvideo
USB Video Class driver (v0.1.0)
uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32.
uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -32.
uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110.
uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110.

replugging gives me:

usb 1-2: new high speed USB device using ehci_hcd and address 15
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c1)
15:3:1: cannot set freq 0 to ep 0x86
15:3:2: cannot set freq 0 to ep 0x86
15:3:3: cannot get freq at ep 0x86

If I try and reload the module, I get

uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c1)
uvcvideo: Failed to query (1) UVC control 1 (unit 0) : -110.
uvcvideo: Failed to initialize the device (-5).
usbcore: registered new driver usbvideo
USB Video Class driver (v0.1.0)

The blue light never comes on. In fact, I didn't even realize the blue
light existed until Laurent mentioned it in a post to Nick, and I
confirmed it in the manual. It could be that this unit is dead out of
the box, as I don't have any windows boxes that I can test it on. But I
think it is more likely that I just need to tweak the driver somehow.

dmesg does not report that any sources (MJPEG or uncompressed) are
available. When I load up ekiga, it sees a device (/dev/video1) but
cannot open it. Instead it gives me an error that says:

"Your video driver doesn't support the requested video format."

If anyone has any suggestions for getting this to work, I would
appreciate it.

-- 

si...@ne...
Plead the First.