RE: [Linux-ATM-General] Question About Unusual Issue - A little more info

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

I have a little more info on this.

I have a trace (below) from atmsigd.  This was recorded when an ethernet
machine attempted to do a traceroute to a Linux ATM machine.  The =
connection
gets a release complete with a cause of "incompatible destination".

I am specifying UNI 4.0 (although the results are the same with 3.0 or =
3.1).
It looks like this problem only occurs when the connection is coming =
from
the default gateway to my ATM interface.  Connections from my ATM =
interface=20
to the default gateway (and other machines) work fine.

I'm not really sure where else to dig for information on this or what I
should change (on the network or locally) to get around it so any help
would be greatly appreciated.

Thanks,
Steve

163 (1080223462.490118) FROM NETWORK (0.0.5):
  _pdsc =3D 9 "Q.2931 user-network call/connection control message"
  _cr_len =3D 3
  call_ref =3D 39493 (0x9a45)
  msg_type =3D 0x05 "SETUP"
  _ext =3D 1
  _flag =3D 0 "instruction field not significant"
  _action_ind =3D 0 "clear call"
  msg_len =3D 113 (0x71)
    _ie_id =3D 0x59 "ATM traffic descriptor"
      _ext =3D 1
      _cs =3D 0 "ITU-T standardized"
      _flag =3D 0 "instruction field not significant"
      _action_ind =3D 0 "clear call"
      _ie_len =3D 11 (0xb)
        _id =3D 0x84 "Forward peak cell rate (CLP=3D0+1)"
          fw_pcr_01 =3D 353207 (0x563b7)
        _id =3D 0x85 "Backward peak cell rate (CLP=3D0+1)"
          bw_pcr_01 =3D 353207 (0x563b7)
        _id =3D 0xbe "Best effort indicator"
        _id =3D 0xbf "Traffic management options"
          fw_fdisc =3D 1 "Frame discard allowed"
          bw_fdisc =3D 1 "Frame discard allowed"
          bw_tag =3D 0 "Tagging not requested"
          fw_tag =3D 0 "Tagging not requested"
    _ie_id =3D 0x5e "Broadband bearer capability"
      _ext =3D 1
      _cs =3D 0 "ITU-T standardized"
      _flag =3D 0 "instruction field not significant"
      _action_ind =3D 0 "clear call"
      _ie_len =3D 3 (0x3)
        bearer_class =3D 16 "BCOB-X"
        _ext =3D 0
          _ext =3D 1
          trans_cap =3D 0x00 "Non-real time VBR (reception only)"
        _ext =3D 1
        susc_clip =3D 0 "not susceptible to clipping"
        upcc =3D 0 "point-to-point"
    _ie_id =3D 0x70 "Called party number"
      _ext =3D 1
      _cs =3D 0 "ITU-T standardized"
      _flag =3D 0 "instruction field not significant"
      _action_ind =3D 0 "clear call"
      _ie_len =3D 21 (0x15)
        _ext =3D 1
        _plan =3D 2 "ATM endsystem address"
          _type =3D 0 "unknown"
          cdpn_esa =3D 47 0 5 80 ff e1 0 0 0 f2 58 0 cf 0 20 48 57 b 97 =
0
    _ie_id =3D 0x5c "Quality of service parameter"
      _ext =3D 1
      qos_cs =3D 0 "ITU-T standardized"
      _flag =3D 0 "instruction field not significant"
      _action_ind =3D 0 "clear call"
      _ie_len =3D 2 (0x2)
        qos_fw =3D 0
        qos_bw =3D 0
    _ie_id =3D 0x5a "Connection identifier"
      _ext =3D 1
      _cs =3D 0 "ITU-T standardized"
      _flag =3D 0 "instruction field not significant"
      _action_ind =3D 0 "clear call"
      _ie_len =3D 5 (0x5)
        _ext =3D 1
        _vp_ass =3D 1 "explicit indication of VPCI"
        _pref_exc =3D 0 "exclusive VPCI; exclusive VCI"
        vpi =3D 0 (0x0)
        vci =3D 69 (0x45)
    _ie_id =3D 0x58 "ATM adaption layer parameters"
      _ext =3D 1
      _cs =3D 0 "ITU-T standardized"
      _flag =3D 0 "instruction field not significant"
      _action_ind =3D 0 "clear call"
      _ie_len =3D 9 (0x9)
        aal_type =3D 5
          _id =3D 0x8c "Forward maximum CPCS-SDU size"
            fw_max_sdu =3D 1516 (0x5ec)
          _id =3D 0x81 "Backward maximum CPCS-SDU size"
            bw_max_sdu =3D 1516 (0x5ec)
          _id =3D 0x84 "SSCS type"
            sscs_type =3D 0 (0x0)
    _ie_id =3D 0x6c "Calling party number"
      _ext =3D 1
      _cs =3D 0 "ITU-T standardized"
      _flag =3D 0 "instruction field not significant"
      _action_ind =3D 0 "clear call"
      _ie_len =3D 21 (0x15)
        cgpn_plan =3D 2 "ATM endsystem address"
        cgpn_type =3D 0 "unknown"
        _ext =3D 1
        cgpn =3D 47 0 5 80 ff e1 0 0 0 f2 1c 92 3e 0 0 ef 3 af 93 1
    _ie_id =3D 0x5f "Broadband low-layer information"
      _ext =3D 1
      _cs =3D 0 "ITU-T standardized"
      _flag =3D 0 "instruction field not significant"
      _action_ind =3D 0 "clear call"
      _ie_len =3D 9 (0x9)
        _lid =3D 3
          uil3_proto =3D 0x0b "ISO/IEC TR 9577"
            _ext =3D 0
              _ext =3D 0
              ipi_high =3D 0x40
                _ext =3D 1
                _ipi_low =3D 0
                  _ext =3D 1
                  _snap_id =3D 0
                  oui =3D 41022 (0xa03e)
                  pid =3D 2 (0x2)
164 (1080223462.490280) TO NETWORK (0.0.5):
  _pdsc =3D 9 "Q.2931 user-network call/connection control message"
  _cr_len =3D 3
  call_ref =3D 8428101 (0x809a45)
  msg_type =3D 0x5a "RELEASE COMPLETE"
  _ext =3D 1
  _flag =3D 0 "instruction field not significant"
  _action_ind =3D 0 "clear call"
  msg_len =3D 6 (0x6)
    _ie_id =3D 0x08 "Cause"
      _ext =3D 1
      cause_cs =3D 0 "ITU-T standardized"
      _flag =3D 0 "instruction field not significant"
      _action_ind =3D 0 "clear call"
      _ie_len =3D 2 (0x2)
        _ext =3D 1
        location =3D 0 "user"
        _ext =3D 1
        cause =3D 88 "incompatible destination"