Booting Apus

[Paul W. M. <pau...@nt...>]

Hello,

I can't seem to get my System to boot into Apus, I run the command line the
screen goes black and then just sits there doing nothing, I have waited
upto 10mins to see if there was a delay before booting but still nothing,
anyideas?

My bootstrap line is:-

BootStrap  --apus -d -k "APUS Boot:apus/vmlinux" -r "APUS
Boot:Apus/images-1.44/root.bin" nobats root=/dev/ram video=clgen:low -d
debug=mem

vmlinux is the latest linux.bin file from debian 3.0r0 the same for root.bin

when I run dmesg afterwards the reply is

Searching for SAVEKMSG magic...
Not found

I'm using the internal scsi on the A4000T.

Regards,
Paul
-- 
Evaluating system...
Central Processing Unit: MC68060 49.9 MHz (rev 1)
  1 WarpUP Processor(s): PPC 604e 200 MHz (rev 2.4), 66 MHz busclock
    Floating Point Unit: 68060fpu 49.9 MHz
 Memory Management Unit: 68060mmu running
   Custom graphics chip: AGA Lisa 4203 (rev 0)
  Custom animation chip: AGA PAL Alice 8374 2M (rev 3-4)
   Other custom chip(s): Paula 8364 (rev 0), Ramsey (rev 15), Gary (rev 0)
        Graphics system: Picasso96
      Graphics board(s): Picasso IV [Paloma Concierto]
           Soundcard(s): Concierto
         Hardware Clock: clock + battmem found, sunday 21-apr-2002 18:38:28
 Max. Chipmem available: 2048 K
 Max. Fastmem available: 130048 K
       ROM chip version: 45.20 (Kickstart 3.9)
      Workbench version: 45.3 (Workbench 3.9)
       SetPatch version: 44.38
     Expansion board(s):
5001/6: individual Computers/VMC HyperCOM Z4 (@$00E90000 64k)
4626/23: individual Computers X-Surf (@$00EA0000 64k)
2167/24: Village Tronic Picasso IV (@$40000000 32M)
8512/100: Phase 5 Digital Products CyberStorm PPC/MK III SCSI (@$00F01060
128k)
Cyberstorm PPC serial #: DCC0270

 Your computer is an Amiga 4000 Tower.