From: John L. <lor...@uk...> - 2002-02-28 22:50:26
|
Hi there On 26-Feb-02, Bartosz Soko=B3owski wrote: > Didn't help :-(( Tell me what versions of Debian, bootstrap etc. have > you got. How large is your hard drive? How are your partitions > organized? Next strange behavior is when I use mke2fs -c /dev/hda4, > preparing the filesystem starts but after a whiele (5-10 sec.) I get > kernel panic :-( Can anyone who have the PowerFlyer describe to me in > private how he has done the Debian installation? bootstrap and ppcboot_pup from the bh000629.lha archive, Kernel 2.4.4, = *To setup a new installation I use the following boot commands:* cd os2linux:2.4.4/ *The next 2 lines are all on 1 command line:* bootstrap --apus -k vmapus-2.4.4 -r root.bin root=3D/dev/ram video=3Dpm2fb:mode:1024x768-70 noscsi 60nsram I only set up partition size and file system on the miggy side, then the format, setup etc was done automatically when doing the install from the cd's. My = 10 Gig hd is set up as follows: DH0: 150Meg PFS\03 Miggy boot LX0: 1.8Gig Identifier 0x4C4E5800 Mask 0x7FFFFFFF MaxTransfer 0x00FFFFFF block size 1024 ** This is the main Linux drive / ** SW0: 216.5M Identifier 0x53575000 Mask 0x7FFFFFFF MaxTransfer 0x00FFFFFF block size 1024 ** This is the Swap partition ** AL0: 500Meg FFS Miggy/Linux partition (Can be see on both systems, so can be used to transfer files, and is mounted in Linux as /dev/hda4 /mnt/amiga DH2: 1.2Gig PFS\03 Miggy Plus others not important to linux. This is using a Power Flyer i/f and only having access to Primary and Slave on the 1st i/f. = If I have missed something ask and I'll see if I can help. Regards -- = John "Leaving sex to the feminists is like letting your dog vacation at the taxidermist." = -- Camille Paglia mailto:ch...@la... or mailto:lor...@uk... http://www.lordofchaos.co.uk ICQ 110130385 = Nick =3D Chaos A1200 BlizzardPPC 240mhz 060/50 BlizzardVision OS3.9 |