After reading the FAQ ... dmesg output

[Ricardo F. <ax...@mo...>]

Searching for SAVEKMSG magic...
Found 2970 bytes at 0x001e0008
>>>>>>>>>>>>>>>>>>>>
SVEN : powerup_PCI_present is 0
SVEN : powerup_BPPCPLUS_present is 0
Total memory =3D 64MB; using 0kB for hash table (at 00000000)
Linux version 2.2.10 (ro...@dr...) (gcc version 2.95.2 20000313=
 (Debian GNU/Linux)) #1 Tue May 2 13:04:10 EDT 2000
Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOA=
RD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA Z=
ORRO =

APUS: BATs=3D1, BUS=3D50MHz, RAM=3D60ns, PCI bridge=3D1
time_init: decrementer frequency =3D 750000000/60
Console: colour dummy device 80x25
Calibrating delay loop... 116.33 BogoMIPS
Memory: 60604k available (1164k kernel code, 1196k data, 108k init) [c000=
0000,c4000000]
POSIX conformance testing by UNIFIX
Zorro: Probing AutoConfig expansion devices: 4 devices
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5 =

CV3D detected running in Z2 mode.
Console: switching to colour frame buffer device 80x30
fb0: Cybervision/3D frame buffer device, using 3584K of video memory
fb1: Amiga AGA frame buffer device, using 1280K of video memory
>clgenfb_init()
clgen: Driver for Cirrus Logic based graphic boards, v1.4 ?
clgen: no supported board found.
**** apus_kbd_init_hw
M68K Serial driver version 1.01
ttyS0 at 0x80dff018: Amiga builtin
Probing for Whippet serial port... (v2.2.0pre7 r0 - 31/Jan/1999)
No PCMCIA Card detected
pty: 256 Unix98 ptys configured
Amiga mouse installed.
DMA sound driver installed, using 4 buffers of 32k.
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
ide0: Gayle IDE interface (A1200 style)
ide1: Buddha IDE interface
ide2: Buddha IDE interface
hdc: SAMSUNG VG32163A (2.16GB), ATA DISK drive
hde: ST36531A, ATA DISK drive
hdf: ATAPI 52X CDROM, ATAPI CDROM drive
ide1 at 80e90800 on irq 0x0000000c
ide2 at 80e90a00 on irq 0x0000000c (shared with ide1)
hdc: SAMSUNG VG32163A (2.16GB), 2063MB w/496kB Cache, CHS=3D4192/16/63
hde: ST36531A, 6204MB w/128kB Cache, CHS=3D13446/15/63
hdf: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
scsi : 0 hosts.
scsi : detected total.
Looking for PCMCIA ethernet card : NO PCMCIA card inserted
Looking for PCMCIA ethernet card : NO PCMCIA card inserted
Looking for PCMCIA ethernet card : NO PCMCIA card inserted
Looking for PCMCIA ethernet card : NO PCMCIA card inserted
Looking for PCMCIA ethernet card : NO PCMCIA card inserted
Looking for PCMCIA ethernet card : NO PCMCIA card inserted
Looking for PCMCIA ethernet card : NO PCMCIA card inserted
Looking for PCMCIA ethernet card : NO PCMCIA card inserted
Partition check:
 hdc: RDSK hdc1 hdc2
 hde: RDSK hde1 hde2 hde3 hde4 hde5 hde6
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 108k init 32k prep 4k pmac 8k open firmware=

Warning: unable to open an initial console.
<<<<<<<<<<<<<<<<<<<<

That's the output I got, BTW in the FAQ it says we suppose to get the lat=
est bootstrap from sourceforge, but the latest there is  000629, I got th=
e one from the ftp.debian.org site , (woody) and all the latest files and=
 still getting the above output.

Rick=