Menu
▾
▴
Pb with 2.4.25 kernel
|
From: Wilfried C. <wca...@no...> - 2004-06-11 15:52:37
|
Hi,
I try to use the 2.4.25 kernel but at boot time, i have a problem with the
Cyberstorm SCSI controler which works well in 2.4.22 (except for the cdrom).
Here is the dmesg output:
Memory BAT mapping: BAT2=64Mb, BAT3=32Mb, residual: 31Mb
Total memory = 127MB; using 256kB for hash table (at c0300000)
Linux version 2.4.25 (willy@SuperAmiga) (gcc version 2.95.4 20011002 (Debian
prerelease)) #1 ven jun 11 14:09:58 CEST 2004
Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD
MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_PAL ZORRO3
On node 0 totalpages: 32640
zone(0): 32640 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sdb2 nobats 60nsram 3
video=clgen:mode:1024x768 debug=mem
ioremap: fffc0000 (00001000) -> fdfff000
ioremap: fffe0000 (00001000) -> fdffe000
APUS: BATs=0, BUS=67MHz, RAM=60ns, PCI bridge=1
time_init: decrementer frequency = 16.670190 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 399.76 BogoMIPS
Memory: 125928k available (1832k kernel code, 688k data, 304k init, 0k
highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Memory resource not set for host bridge 0
PCI: Cannot allocate resource region 2 of device 00:01.0
PCI: moved device 00:01.0 resource 2 (200) to e0000000
Zorro: Probing AutoConfig expansion devices: 7 devices
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
parport0: Amiga built-in port using irq
clgen: Driver for Cirrus Logic based graphic boards, v1.9.9.1
clgenfb: couldn't find Cirrus Logic PCI device
Console: switching to colour frame buffer device 80x25
fb0: Amiga AGA frame buffer device, using 1280K of video memory
ioremap: fffc0000 (00001000) -> c801a000
ioremap: fffe0000 (00001000) -> c801c000
ioremap: e0000000 (00800000) -> c801e000
ioremap: ef010000 (00010000) -> c881f000
fb1: CVisionPPC/BVisionPPC (Permedia2), using 8192K of video memory.
pty: 256 Unix98 ptys configured
Amiga-builtin serial driver version 4.30
ttyS00 is the amiga builtin serial port
Amiga mouse installed.
Generic RTC Driver v1.07
FD: probing units
found fd0
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit
encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
No Ariadne II or X-Surf ethernet card found.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: Gayle IDE interface (A4000 style)
Probing IDE interface ide0...
hda: WDC AC28400R, ATA DISK drive
hdb: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
ide0 at 0x80dd2020 on irq 12
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: host protected area => 1
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=16383/16/63
hdb: attached ide-floppy driver.
hdb: No disk in drive
hdb: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
Partition check:
hda: RDSK hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11
SCSI subsystem driver Revision: 1.00
ncr53c8xx: 53c770 detected
ncr53c770-0: rev=0x00, base=0xf40000, io_port=0x0, irq=12
ncr53c770-0: using memory mapped IO at virtual address 0x80f40000
ncr53c770-0: ID 7, Fast-20, Parity Checking
ncr53c770-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/c0/21/00/00/04
ncr53c770-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/c0/21/00/00/04
ncr53c770-0: on-chip RAM at 0xf41000
ncr53c770-0: resetting, command processing suspended for 2 seconds
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
scsi0 : ncr53c770-3.4.3-20010212
ncr53c770-0: command processing resumed
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: IBM Model: DDRS-34560D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: DDYS-T09170N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi disk sda at scsi0, channel 0, id 8, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0
ncr53c770-0-<8,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sda: 8925000 512-byte hdwr sectors (4570 MB)
sda:<6>ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=31 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<8,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
SCSI disk error : host 0 channel 0 id 8 lun 0 return code = 27070000
I/O error: dev 08:00, sector 0
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=36 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<8,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
SCSI disk error : host 0 channel 0 id 8 lun 0 return code = 27070000
I/O error: dev 08:00, sector 2
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=41 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<8,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
SCSI disk error : host 0 channel 0 id 8 lun 0 return code = 27070000
I/O error: dev 08:00, sector 4
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=47 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<8,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
SCSI disk error : host 0 channel 0 id 8 lun 0 return code = 27070000
I/O error: dev 08:00, sector 0
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=52 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<8,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<8,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
ncr53c770-0-<8,0>: extended error 15.
ncr53c770-0-<8,0>: COMMAND FAILED (89 0) @c7e80000.
SCSI disk error : host 0 channel 0 id 8 lun 0 return code = 27070000
I/O error: dev 08:00, sector 2
unable to read partition table
ncr53c770-0-<9,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB)
sdb:<6>ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=61 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<9,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
SCSI disk error : host 0 channel 0 id 9 lun 0 return code = 27070000
I/O error: dev 08:10, sector 0
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=66 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<9,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
SCSI disk error : host 0 channel 0 id 9 lun 0 return code = 27070000
I/O error: dev 08:10, sector 2
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=71 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<9,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
SCSI disk error : host 0 channel 0 id 9 lun 0 return code = 27070000
I/O error: dev 08:10, sector 4
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=77 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<9,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
SCSI disk error : host 0 channel 0 id 9 lun 0 return code = 27070000
I/O error: dev 08:10, sector 0
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
ncr53c8xx_reset: pid=82 reset_flags=1 serial_number=0
serial_number_at_timeout=0
ncr53c770-0: resetting, command processing suspended for 2 seconds
scsi0: device driver called scsi_done() for a synchronous reset.
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed
ncr53c770-0-<9,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0-<9,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
ncr53c770-0-<9,0>: extended error 15.
ncr53c770-0-<9,0>: COMMAND FAILED (89 0) @c7e80800.
SCSI disk error : host 0 channel 0 id 9 lun 0 return code = 27070000
I/O error: dev 08:10, sector 2
unable to read partition table
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Cannot open root device "sdb2" or 08:12
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 08:12
<0>Rebooting in 180 seconds..<<<<<<<<<<<<<<<<<<<<
Is it possible to fix this pb ?
Thanks,
Willy.
|
