Re: Cyberstorm SCSI

[Ken T. <ke...@we...>]

Hello,

This is what I'm seeing with the init changes, is this what
you get ?

Ken.



Trying to detect PuP SCSI...
ncr53c8xx: 53c770 detected
ncr53c770-0: rev=0x00, base=0xf40000, io_port=0x0, irq=12
ncr53c770-0: using memory mapped IO at virtual address 0x80f40000
io_port: 0
ncr53c770-0: ID 7, Fast-20, Parity Checking
verbose:5 clock:100000 minsync:12 div:5
ncr53c770-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
05/c0/21/00/00/04
ncr53c770-0: final   SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
05/c0/21/00/00/04
ncr53c770-0: on-chip RAM at 0xf41000
t_istat: c0170000 dstat: 84 (-1072234496 128)
dsp: 84ebd70 dsps: 63 (139378032 99)
sstat2: a (10)
requesting irq...
shared irq
ncr53c770-0: resetting, command processing suspended for 2 seconds
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
scsi1 : ncr53c770 - revision 2.5c
ncr53c770-0: command processing resumed
  Vendor: SEAGATE   Model: ST15150W          R v: 9107
  Type:   Direct-Access                      ANSI SCSI revision: 02

(repeat the next bit forever...)
ncr53c770-0-<0,*>: WIDE SCSI (16 bit) enabled.
ncr53c770-0:0: ERROR (81:0) (0-a7-80) (0/d) @ (script 414:9f030000).
ncr53c770-0: script cmd = 72580000
ncr53c770-0: regdump: 0d 10 80 0d 47 00 00 1e 80 00 80 a7 80 00 07 0b.
ncr53c770-0: have to clear fifos.
ncr53c770-0: resetting, command processing suspended for 2 seconds
ncr53c770-0: restart (scsi reset).
ncr53c770-0: enabling clock multiplier
ncr53c770-0: Downloading SCSI SCRIPTS.
ncr53c770-0: command processing resumed