continued: problem with LinuxAPUS > 2.4.9 ??

[Alan B. <al...@ms...>]

hi,

well, I'm now running the 2.4.14 CVS and still having the same problem....
Below are the outputs of bootmesg and dmesg. Same result with own config
and the 'standard' APUS config (ie the one i used to generate the 2.4.9
kernel available from download site)



-----bootmesg output------
Searching for SAVEBOOT magic...
Found 22 bytes at 0x001fff10
>>>>>>>>>>>>>>>>>>>>
!Sdddteiiw?!1ts234567K<<<<<<<<<<<<<<<<<<<<

-----dmesg output---------
Searching for SAVEKMSG magic...
Found 3384 bytes at 0x001e0010
>>>>>>>>>>>>>>>>>>>>
Linux version 2.4.14 (root@debalan) (gcc version 2.95.4 20011006 (Debian
prerelease)) #15 Sun Nov 11 21:49:39 GMT 2001
Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD
MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO
On node 0 totalpages: 24320
zone(0): 24320 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: debug=mem root=/dev/hda12 hdb=ide-scsi
video=pm2fb:mode:1024x768-60 ide=doubler video=amifb:off 60nsram
ide_setup: hdb=ide-scsi
ide_setup: ide=doubler : Enabled support for IDE doublers
ioremap: fffc0000 (00001000) -> fdfff000
ioremap: fffe0000 (00001000) -> fdffe000
APUS: BATs=1, BUS=60MHz, RAM=60ns, PCI bridge=1
time_init: decrementer frequency = 15.003729 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 159.74 BogoMIPS
Memory: 92980k available (1700k kernel code, 708k data, 260k init, 0k
highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Memory resource not set for host bridge 0
apus_pcibios_fixup: PCI mem resource requested
PCI: Cannot allocate resource region 1 of PCI bridge 0
PCI: resource is e0000000..fffc0000 (200), parent c01f7be0
PCI:00:01.0: Resource 0: ef000000-ef01ffff (f=200)
PCI:00:01.0: Resource 1: e0000000-e07fffff (f=200)
PCI:00:01.0: Resource 2: e1000000-e17fffff (f=200)
PCI: Switching off ROM of 00:01.0
Zorro: Probing AutoConfig expansion devices: 8 devices
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[fffa0000:fffaffff]
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[fffc0000:fffdffff]
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[e0000000:e07fffff]
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[e0800000:e0ffffff]
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[e1000000:e101ffff]
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd
ioremap: fffc0000 (00001000) -> c600d000
ioremap: fffe0000 (00001000) -> c600f000
ioremap: e0000000 (00800000) -> c6011000
ioremap: ef010000 (00010000) -> c6812000
Console: switching to colour frame buffer device 128x48
fb0: CVisionPPC/BVisionPPC (Permedia2), using 8192K of video memory.
clgen: Driver for Cirrus Logic based graphic boards, v1.9.9
 Couldn't find PCI device
pty: 256 Unix98 ptys configured
Commodore A2232 driver initializing.
Total: 0 A2232 boards initialized.
Amiga-builtin serial driver version 4.30
ttyS00 is the amiga builtin serial port
Amiga mouse installed.
Generic RTC Driver v1.02
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: Gayle IDE interface (A1200 style)
ide1: IDE doubler
+++ Probing for IDE doubler... probe returned 0x6620 (PLEASE REPORT THIS!!)
hda: FUJITSU MPE3084AE, ATA DISK drive
hdb: CR-2801TE, ATAPI CD/DVD-ROM drive
amikeyb: unknown keyboard communication code 0xff
<<<<<<<<<<<<<<<<<<<<