Re: symbols

[<fh...@at...>]

In <Pine.LNX.4.10.10008021416290.427-100000@cassiopeia.home>, on 08/02/00 
   at 02:21 PM, Geert Uytterhoeven <ge...@li...> said:

>On Tue, 1 Aug 2000 fh...@at... wrote:

>Depending on the wanted endiannes (I don't know how the 53c770 is
>connected to the PPC bus, it could be byte swapped), you should map e.g.
>writel_b2l() to out_be32() or out_le32(). Note that arguments for writel
>and out_*32 are in a different order.

How would I find out?  I tried sending a message to Ralph Schmidt but so
far I have received no answer.  Attached is my latest dmesg after
compiling the driver as MMIO.  I guess I now have to learn about SCSI
scripts.  Any pointers?

Fred


Searching for SAVEKMSG magic...
Found 2653 bytes at 0x001e0008
>>>>>>>>>>>>>>>>>>>>
Total memory = 64MB; using 256kB for hash table (at c0200000) Linux
version 2.2.10 (root@amiga1) (gcc version 2.95.2 19991024 (release)) #111
Thu Aug 3 07:23:29 EDT 2000 Amiga hardware found: [A4000T] VIDEO BLITTER
AUDIO FLOPPY A4000_SCSI A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK
CHIP_RAM PAULA LISA ALICE_NTSC ZORRO3  APUS: BATs=0, BUS=66MHz, RAM=70ns,
PCI bridge=1
time_init: decrementer frequency = 990000000/60
Console: colour dummy device 80x25
Calibrating delay loop... 395.67 BogoMIPS
Memory: 62160k available (1216k kernel code, 1536k data, 112k init)
[c0000000,c4000000] POSIX conformance testing by UNIFIX
Zorro: Probing AutoConfig expansion devices: 5 devices
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCPCStarting kswapd v 1.5 
CV3D detected running in Z3 mode
Console: switching to colour frame buffer device 160x64
fb0: Cybervision/3D frame buffer device, using 4096K of video memory fb1:
Amiga AGA frame buffer device, using 1280K of video memory ****
apus_kbd_init_hw
M68K Serial driver version 1.01
ttyS0 at 0x80dff018: Amiga builtin
pty: 256 Unix98 ptys configured
lp_init: lp using interrupt driver
lp0: Builtin parallel port at 0x80bfe101
Amiga mouse installed.
DMA sound driver installed, using 4 buffers of 32k.
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
ide0: Gayle IDE interface (A4000 style)
hda: ST34342A, ATA DISK drive
ide0 at 80dd2020 on irq 0x0000000c
hda: ST34342A, 4103MB w/128kB Cache, CHS=8894/15/63
FD: probing units
fouod <5>fd: drive 0 didn't identify, setting default ffffffff fd0 fd1 
scsi-ncr53c7xx : NCR53c710 at memory 0x80dd0040, io 0x0, irq 12 scsi0:
Revision 0x1
scsi0 : NCR code relocated to 0xbf365e8 (virt 0xc3f365e8)
scsi0 : test 1 started
ncr53c8xx: 53c770 detected 
ncr53c770-0: rev=0x00, base=0xf40000, io_port=0x0, irq=12
new NCB[2924] @c02f0000.
new SCRIPT[3772] @c3f35000.
new SCRIPTH[3708] @c3f34000.
Peparing...
stuff: 10 5 192 32 1
set verbose:
myaddr: 0
myaddr: 7
myaddr: 7
ncr53c770-0: ID 7, Fast-20, Parity Checking
ncr53c770-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
05/c0/20/00/00/04 ncr53c770-0: final   SCNTL3/DMODE/DCNTL/CTEST3/4/5 =
(hex) 05/82/20/00/08/24 istat: 0
SCSI reset
istat: 40
istat: 0
offset: c
CACHE TEST FAILED: script execution failed.
start=0bf34e50, pc=00004e7c, end=0bf34e7c
c0000004 082f006c
00f40034 c0000004
00f4001c 082f006c
c0000004 082f006c
00f4001c 98080000
00000063 00000000
00000000 00000000
00000000 00000000
00000000 00000000
00000000 00000000
<<<<<<<<<<<<<<<<<<<<