Re: scsi disk

[<du...@ds...>]

I looked into driver code (53c7xx.c) and i found this in bug list:

 * - With OPTION_DISCONNECT, on two systems under unknown circumstances,
 *    we get a PHASE MISMATCH with DSA set to zero (suggests that we
 *    are occurring somewhere in the reselection code) where
 *    DSP=some value DCMD|DBC=same value. 
 *    
 *    Closer inspection suggests that we may be trying to execute
 *    some portion of the DSA?
 * scsi0 : handling residual transfer (+ 0 bytes from DMA FIFO)
 * scsi0 : handling residual transfer (+ 0 bytes from DMA FIFO)
 * scsi0 : no current command : unexpected phase MSGIN.
 *         DSP=0x1c46cc, DCMD|DBC=0x1c46ac, DSA=0x0
 *         DSPS=0x0, TEMP=0x1c3e70, DMODE=0x80
 * scsi0 : DSP->
 * 001c46cc : 0x001c46cc 0x00000000
 * 001c46d4 : 0x001c5ea0 0x000011f8
 *
 *    Changed the print code in the phase_mismatch handler so
 *    that we call print_lots to try to diagnose this.

I tryed boot with option 53c7xx=nosync:0,nodisconnect:0 but this option 
not pass to driver. I think that reason is ncr53c7xx_setup.
This function is never called...

dus