Debian finally works!!

[Bartosz S. <baz...@po...>]

Hello,

Some time ago I was suffering from troubles installing Debian and having
strange kernel opses and panics. At the moment I think the problems are
solved :)! The main cause was RAM speed. Debian on my system works
correctly only if I remove '60nsram' from bootstrap. This is quite strange
since I can set memory controller of BlizzPPC to fastest possible mode by
"setmemmode" command and run Workbench (Quake in window and RC5 client) for
several hours with no problems! The second thing is powering the PPC card.
Without bootstrap's 60nsram Debian worked basically fine but some strange
opses happened from time to time. I checked voltage at BlizzPPC fan
connector - had ~4.57V :( I did some powering tuning to my tower system and
I achieved ~4.92V and Debian Woody with kernel 2.4.13 seems to work fine :)

So now we can note that Debian works on following hardware :)

Regards,
-- 
Bartosz (Bazant) Sokolowski
A1200T PPC603@210, 060@50, 192MB RAM, 
BVision, HD 30GB, FastATA etc. :)


----------------------------------------------------------------------
Dla tych, co sie cenia... >>> http://link.interia.pl/f1713