Menu
▾
▴
linux-apus-devel
|
From: Wilko K. <W.K...@ch...> - 2000-06-23 12:10:01
|
Hi, I have a ICard pcmcia ethernet card, which is NOT working with the NE*000 driver. Is this card supported under LinuxPPC ?, if so which drivers should I use? Wilko -- +------------------------------------------------------------+ | Dr. Wilko Keegstra phone: +31594514153,+31610477915| | Groningen University email: W.K...@ch... | | Dept.of Biophys.Chemistry | | Nijenborgh 4 phone: +31503634224 | | 9747 AG GRONINGEN fax : +31503634800 | | The Netherlands | +------------------------------------------------------------+ |
|
From: <no...@so...> - 2001-02-01 11:55:15
|
Bug #130693, was updated on 2001-Feb-01 03:55 Here is a current snapshot of the bug. Project: Linux/APUS Kernel Category: 2.4 Kernel Status: Open Resolution: None Bug Group: None Priority: 5 Submitted by: dus Assigned to : nobody Summary: pcmcia ethernet card Details: i compiled 2.4.0 sources with apne and system stop when kernel look for pcmcia ethernet card. i think that system is still alive, but wait for something. i can send via e-mail dmesg and .config dus For detailed info, follow this link: http://sourceforge.net/bugs/?func=detailbug&bug_id=130693&group_id=5907 |
|
From: <no...@so...> - 2001-02-01 12:47:25
|
Bug #130693, was updated on 2001-Feb-01 03:55 Here is a current snapshot of the bug. Project: Linux/APUS Kernel Category: 2.4 Kernel Status: Open Resolution: None Bug Group: None Priority: 5 Submitted by: dus Assigned to : nobody Summary: pcmcia ethernet card Details: i compiled 2.4.0 sources with apne and system stop when kernel look for pcmcia ethernet card. i think that system is still alive, but wait for something. i can send via e-mail dmesg and .config dus Follow-Ups: Date: 2001-Feb-01 04:47 By: mdaenzer Comment: Please include the dmesg and .config with this bug. ------------------------------------------------------- For detailed info, follow this link: http://sourceforge.net/bugs/?func=detailbug&bug_id=130693&group_id=5907 |
|
From: <no...@so...> - 2001-03-30 10:11:53
|
Bugs item #230693, was updated on 2001-02-01 03:55 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 Category: 2.4 Kernel Group: None Status: Open Priority: 5 Submitted By: Piotr Tajdus (dus) Assigned to: Nobody/Anonymous (nobody) Summary: pcmcia ethernet card Initial Comment: i compiled 2.4.0 sources with apne and system stop when kernel look for pcmcia ethernet card. i think that system is still alive, but wait for something. i can send via e-mail dmesg and .config dus ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 02:11 Message: Logged In: NO I have the same problem with 2.4.2 (the one which can be downloaded from here). I have to remove my PCMCIA ethernet to be able to boot up. Both 2.2.10 and 2.4.1 crashes for me when trying to boot from them after install. So the only time I can use my ethernet card is when I'm install LinuxPPC with 2.2.10 ---------------------------------------------------------------------- Comment By: Michel Dänzer (mdaenzer) Date: 2001-02-01 04:47 Message: Please include the dmesg and .config with this bug. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 |
|
From: <no...@so...> - 2001-03-30 11:47:33
|
Bugs item #230693, was updated on 2001-02-01 03:55 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 Category: 2.4 Kernel Group: None Status: Open Priority: 5 Submitted By: Piotr Tajdus (dus) Assigned to: Nobody/Anonymous (nobody) Summary: pcmcia ethernet card Initial Comment: i compiled 2.4.0 sources with apne and system stop when kernel look for pcmcia ethernet card. i think that system is still alive, but wait for something. i can send via e-mail dmesg and .config dus ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 03:47 Message: Logged In: NO My output from dmesg >>>>>>>>>>>>>>>>>>>> Total memory = 63MB; using 0kB for hash table (at 00000000) Linux version 2.4.2 (michdaen@pismo) (gcc version 2.95.3 20010219 (prerelease)) #66 Thu Mar 15 18:29:35 CET 2001 Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO On node 0 totalpages: 16256 zone(0): 16256 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda3 debug=mem nobat 60nsram amiga_enable_irq: Trying to enable auto-vector IRQ 1 amiga_enable_irq: Trying to enable auto-vector IRQ 3 amiga_enable_irq: Trying to enable auto-vector IRQ 4 amiga_enable_irq: Trying to enable auto-vector IRQ 5 amiga_enable_irq: Trying to enable auto-vector IRQ 7 amiga_enable_irq: Trying to enable auto-vector IRQ 2 amiga_enable_irq: Trying to enable auto-vector IRQ 6 APUS: BATs=1, BUS=67MHz, RAM=60ns, PCI bridge=0 time_init: decrementer frequency = 16.504254 MHz Console: colour dummy device 80x25 Calibrating delay loop... 109.77 BogoMIPS Memory: 61124k available (1688k kernel code, 788k data, 264k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Zorro: Probing AutoConfig expansion devices: 1 device Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 Console: switching to colour frame buffer device 80x25 fb0: Amiga AGA frame buffer device, using 1280K of video memory clgen: Driver for Cirrus Logic based graphic boards, v1.9.8 Couldn't find PCI device pty: 256 Unix98 ptys configured block: queued sectors max/low 40496kB/13498kB, 128 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide0: Gayle IDE interface (A1200 style) hda: QUANTUM FIREBALL_TM2550A, ATA DISK drive hdb: QUANTUM FIREBALL1280A, ATA DISK drive ide0 at 80da0000 on irq 0x0000000c hda: 5008752 sectors (2564 MB) w/76KiB Cache, CHS=4969/16/63 hdb: 2503872 sectors (1282 MB) w/83KiB Cache, CHS=2484/16/63 Partition check: hda: RDSK hda1 hda2 hda3 hdb: RDSK hdb1 hdb2 FD: probing units found <5>fd: drive 0 didn't identify, setting default ffffffff fd0 Looking for PCMCIA ethernet card : <<<<<<<<<<<<<<<<<<<< ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 02:11 Message: Logged In: NO I have the same problem with 2.4.2 (the one which can be downloaded from here). I have to remove my PCMCIA ethernet to be able to boot up. Both 2.2.10 and 2.4.1 crashes for me when trying to boot from them after install. So the only time I can use my ethernet card is when I'm install LinuxPPC with 2.2.10 ---------------------------------------------------------------------- Comment By: Michel Dänzer (mdaenzer) Date: 2001-02-01 04:47 Message: Please include the dmesg and .config with this bug. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 |
|
From: <no...@so...> - 2001-05-17 15:42:12
|
Bugs item #230693, was updated on 2001-02-01 03:55 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 Category: 2.4 Kernel Group: None Status: Open Resolution: None Priority: 5 Submitted By: Piotr Tajdus (dus) Assigned to: Nobody/Anonymous (nobody) Summary: pcmcia ethernet card Initial Comment: i compiled 2.4.0 sources with apne and system stop when kernel look for pcmcia ethernet card. i think that system is still alive, but wait for something. i can send via e-mail dmesg and .config dus ---------------------------------------------------------------------- Comment By: Alan buxey (alanbuxey) Date: 2001-05-17 08:42 Message: Logged In: YES user_id=34303 do you get the same result when you use 2.4.4 (use CVS to upgrade your sources) ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 03:47 Message: Logged In: NO My output from dmesg >>>>>>>>>>>>>>>>>>>> Total memory = 63MB; using 0kB for hash table (at 00000000) Linux version 2.4.2 (michdaen@pismo) (gcc version 2.95.3 20010219 (prerelease)) #66 Thu Mar 15 18:29:35 CET 2001 Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO On node 0 totalpages: 16256 zone(0): 16256 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda3 debug=mem nobat 60nsram amiga_enable_irq: Trying to enable auto-vector IRQ 1 amiga_enable_irq: Trying to enable auto-vector IRQ 3 amiga_enable_irq: Trying to enable auto-vector IRQ 4 amiga_enable_irq: Trying to enable auto-vector IRQ 5 amiga_enable_irq: Trying to enable auto-vector IRQ 7 amiga_enable_irq: Trying to enable auto-vector IRQ 2 amiga_enable_irq: Trying to enable auto-vector IRQ 6 APUS: BATs=1, BUS=67MHz, RAM=60ns, PCI bridge=0 time_init: decrementer frequency = 16.504254 MHz Console: colour dummy device 80x25 Calibrating delay loop... 109.77 BogoMIPS Memory: 61124k available (1688k kernel code, 788k data, 264k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Zorro: Probing AutoConfig expansion devices: 1 device Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 Console: switching to colour frame buffer device 80x25 fb0: Amiga AGA frame buffer device, using 1280K of video memory clgen: Driver for Cirrus Logic based graphic boards, v1.9.8 Couldn't find PCI device pty: 256 Unix98 ptys configured block: queued sectors max/low 40496kB/13498kB, 128 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide0: Gayle IDE interface (A1200 style) hda: QUANTUM FIREBALL_TM2550A, ATA DISK drive hdb: QUANTUM FIREBALL1280A, ATA DISK drive ide0 at 80da0000 on irq 0x0000000c hda: 5008752 sectors (2564 MB) w/76KiB Cache, CHS=4969/16/63 hdb: 2503872 sectors (1282 MB) w/83KiB Cache, CHS=2484/16/63 Partition check: hda: RDSK hda1 hda2 hda3 hdb: RDSK hdb1 hdb2 FD: probing units found <5>fd: drive 0 didn't identify, setting default ffffffff fd0 Looking for PCMCIA ethernet card : <<<<<<<<<<<<<<<<<<<< ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 02:11 Message: Logged In: NO I have the same problem with 2.4.2 (the one which can be downloaded from here). I have to remove my PCMCIA ethernet to be able to boot up. Both 2.2.10 and 2.4.1 crashes for me when trying to boot from them after install. So the only time I can use my ethernet card is when I'm install LinuxPPC with 2.2.10 ---------------------------------------------------------------------- Comment By: Michel Daenzer (mdaenzer) Date: 2001-02-01 04:47 Message: Please include the dmesg and .config with this bug. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 |
|
From: <no...@so...> - 2002-02-12 13:06:55
|
Bugs item #230693, was opened at 2001-02-01 03:55 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 Category: 2.4 Kernel Group: None Status: Open >Resolution: Remind Priority: 5 Submitted By: Piotr Tajdus (dus) Assigned to: Nobody/Anonymous (nobody) Summary: pcmcia ethernet card Initial Comment: i compiled 2.4.0 sources with apne and system stop when kernel look for pcmcia ethernet card. i think that system is still alive, but wait for something. i can send via e-mail dmesg and .config dus ---------------------------------------------------------------------- >Comment By: Alan buxey (alanbuxey) Date: 2002-02-12 05:06 Message: Logged In: YES user_id=34303 Does this problem still occur in recent 2.4.x release? ---------------------------------------------------------------------- Comment By: Alan buxey (alanbuxey) Date: 2001-05-17 08:42 Message: Logged In: YES user_id=34303 do you get the same result when you use 2.4.4 (use CVS to upgrade your sources) ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 03:47 Message: Logged In: NO My output from dmesg >>>>>>>>>>>>>>>>>>>> Total memory = 63MB; using 0kB for hash table (at 00000000) Linux version 2.4.2 (michdaen@pismo) (gcc version 2.95.3 20010219 (prerelease)) #66 Thu Mar 15 18:29:35 CET 2001 Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO On node 0 totalpages: 16256 zone(0): 16256 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda3 debug=mem nobat 60nsram amiga_enable_irq: Trying to enable auto-vector IRQ 1 amiga_enable_irq: Trying to enable auto-vector IRQ 3 amiga_enable_irq: Trying to enable auto-vector IRQ 4 amiga_enable_irq: Trying to enable auto-vector IRQ 5 amiga_enable_irq: Trying to enable auto-vector IRQ 7 amiga_enable_irq: Trying to enable auto-vector IRQ 2 amiga_enable_irq: Trying to enable auto-vector IRQ 6 APUS: BATs=1, BUS=67MHz, RAM=60ns, PCI bridge=0 time_init: decrementer frequency = 16.504254 MHz Console: colour dummy device 80x25 Calibrating delay loop... 109.77 BogoMIPS Memory: 61124k available (1688k kernel code, 788k data, 264k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Zorro: Probing AutoConfig expansion devices: 1 device Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 Console: switching to colour frame buffer device 80x25 fb0: Amiga AGA frame buffer device, using 1280K of video memory clgen: Driver for Cirrus Logic based graphic boards, v1.9.8 Couldn't find PCI device pty: 256 Unix98 ptys configured block: queued sectors max/low 40496kB/13498kB, 128 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide0: Gayle IDE interface (A1200 style) hda: QUANTUM FIREBALL_TM2550A, ATA DISK drive hdb: QUANTUM FIREBALL1280A, ATA DISK drive ide0 at 80da0000 on irq 0x0000000c hda: 5008752 sectors (2564 MB) w/76KiB Cache, CHS=4969/16/63 hdb: 2503872 sectors (1282 MB) w/83KiB Cache, CHS=2484/16/63 Partition check: hda: RDSK hda1 hda2 hda3 hdb: RDSK hdb1 hdb2 FD: probing units found <5>fd: drive 0 didn't identify, setting default ffffffff fd0 Looking for PCMCIA ethernet card : <<<<<<<<<<<<<<<<<<<< ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 02:11 Message: Logged In: NO I have the same problem with 2.4.2 (the one which can be downloaded from here). I have to remove my PCMCIA ethernet to be able to boot up. Both 2.2.10 and 2.4.1 crashes for me when trying to boot from them after install. So the only time I can use my ethernet card is when I'm install LinuxPPC with 2.2.10 ---------------------------------------------------------------------- Comment By: Michel Daenzer (mdaenzer) Date: 2001-02-01 04:47 Message: Please include the dmesg and .config with this bug. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 |
|
From: <no...@so...> - 2002-02-15 21:12:48
|
Bugs item #230693, was opened at 2001-02-01 03:55 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 Category: 2.4 Kernel Group: None Status: Open Resolution: Remind Priority: 5 Submitted By: Piotr Tajdus (dus) Assigned to: Nobody/Anonymous (nobody) Summary: pcmcia ethernet card Initial Comment: i compiled 2.4.0 sources with apne and system stop when kernel look for pcmcia ethernet card. i think that system is still alive, but wait for something. i can send via e-mail dmesg and .config dus ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2002-02-15 13:09 Message: Logged In: NO I never got the chance to test as I had to move the harddrive to another computer, so I have given up APUS and NetBSD PPC for a while. ---------------------------------------------------------------------- Comment By: Alan buxey (alanbuxey) Date: 2002-02-12 05:06 Message: Logged In: YES user_id=34303 Does this problem still occur in recent 2.4.x release? ---------------------------------------------------------------------- Comment By: Alan buxey (alanbuxey) Date: 2001-05-17 08:42 Message: Logged In: YES user_id=34303 do you get the same result when you use 2.4.4 (use CVS to upgrade your sources) ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 03:47 Message: Logged In: NO My output from dmesg >>>>>>>>>>>>>>>>>>>> Total memory = 63MB; using 0kB for hash table (at 00000000) Linux version 2.4.2 (michdaen@pismo) (gcc version 2.95.3 20010219 (prerelease)) #66 Thu Mar 15 18:29:35 CET 2001 Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO On node 0 totalpages: 16256 zone(0): 16256 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda3 debug=mem nobat 60nsram amiga_enable_irq: Trying to enable auto-vector IRQ 1 amiga_enable_irq: Trying to enable auto-vector IRQ 3 amiga_enable_irq: Trying to enable auto-vector IRQ 4 amiga_enable_irq: Trying to enable auto-vector IRQ 5 amiga_enable_irq: Trying to enable auto-vector IRQ 7 amiga_enable_irq: Trying to enable auto-vector IRQ 2 amiga_enable_irq: Trying to enable auto-vector IRQ 6 APUS: BATs=1, BUS=67MHz, RAM=60ns, PCI bridge=0 time_init: decrementer frequency = 16.504254 MHz Console: colour dummy device 80x25 Calibrating delay loop... 109.77 BogoMIPS Memory: 61124k available (1688k kernel code, 788k data, 264k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Zorro: Probing AutoConfig expansion devices: 1 device Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 Console: switching to colour frame buffer device 80x25 fb0: Amiga AGA frame buffer device, using 1280K of video memory clgen: Driver for Cirrus Logic based graphic boards, v1.9.8 Couldn't find PCI device pty: 256 Unix98 ptys configured block: queued sectors max/low 40496kB/13498kB, 128 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide0: Gayle IDE interface (A1200 style) hda: QUANTUM FIREBALL_TM2550A, ATA DISK drive hdb: QUANTUM FIREBALL1280A, ATA DISK drive ide0 at 80da0000 on irq 0x0000000c hda: 5008752 sectors (2564 MB) w/76KiB Cache, CHS=4969/16/63 hdb: 2503872 sectors (1282 MB) w/83KiB Cache, CHS=2484/16/63 Partition check: hda: RDSK hda1 hda2 hda3 hdb: RDSK hdb1 hdb2 FD: probing units found <5>fd: drive 0 didn't identify, setting default ffffffff fd0 Looking for PCMCIA ethernet card : <<<<<<<<<<<<<<<<<<<< ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 02:11 Message: Logged In: NO I have the same problem with 2.4.2 (the one which can be downloaded from here). I have to remove my PCMCIA ethernet to be able to boot up. Both 2.2.10 and 2.4.1 crashes for me when trying to boot from them after install. So the only time I can use my ethernet card is when I'm install LinuxPPC with 2.2.10 ---------------------------------------------------------------------- Comment By: Michel Daenzer (mdaenzer) Date: 2001-02-01 04:47 Message: Please include the dmesg and .config with this bug. ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 |
|
From: SourceForge.net <no...@so...> - 2003-12-01 06:08:30
|
Bugs item #230693, was opened at 2001-02-01 14:55 Message generated for change (Comment added) made by sonic_amiga You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 Category: 2.4 Kernel Group: None Status: Open Resolution: Remind Priority: 5 Submitted By: Piotr Tajdus (dus) Assigned to: Nobody/Anonymous (nobody) Summary: pcmcia ethernet card Initial Comment: i compiled 2.4.0 sources with apne and system stop when kernel look for pcmcia ethernet card. i think that system is still alive, but wait for something. i can send via e-mail dmesg and .config dus ---------------------------------------------------------------------- Comment By: Pavel Fedin (sonic_amiga) Date: 2003-12-01 09:08 Message: Logged In: YES user_id=811665 I've downloaded 2.4.20-1 kernel and test ramdisk and tried to run it on my A1200 with BlizzardPPC 240 mHz. System starts finds my NE2000 card (works perfectly with Genesis 1.06 and latest cnet.device), and than illegal address access occurs and kernel panics. I did not try to remove my card, i performed my tests at evening and was too tired to disassemble my machine. ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2002-02-16 00:09 Message: Logged In: NO I never got the chance to test as I had to move the harddrive to another computer, so I have given up APUS and NetBSD PPC for a while. ---------------------------------------------------------------------- Comment By: Alan buxey (alanbuxey) Date: 2002-02-12 16:06 Message: Logged In: YES user_id=34303 Does this problem still occur in recent 2.4.x release? ---------------------------------------------------------------------- Comment By: Alan buxey (alanbuxey) Date: 2001-05-17 19:42 Message: Logged In: YES user_id=34303 do you get the same result when you use 2.4.4 (use CVS to upgrade your sources) ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 15:47 Message: Logged In: NO My output from dmesg >>>>>>>>>>>>>>>>>>>> Total memory = 63MB; using 0kB for hash table (at 00000000) Linux version 2.4.2 (michdaen@pismo) (gcc version 2.95.3 20010219 (prerelease)) #66 Thu Mar 15 18:29:35 CET 2001 Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO On node 0 totalpages: 16256 zone(0): 16256 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda3 debug=mem nobat 60nsram amiga_enable_irq: Trying to enable auto-vector IRQ 1 amiga_enable_irq: Trying to enable auto-vector IRQ 3 amiga_enable_irq: Trying to enable auto-vector IRQ 4 amiga_enable_irq: Trying to enable auto-vector IRQ 5 amiga_enable_irq: Trying to enable auto-vector IRQ 7 amiga_enable_irq: Trying to enable auto-vector IRQ 2 amiga_enable_irq: Trying to enable auto-vector IRQ 6 APUS: BATs=1, BUS=67MHz, RAM=60ns, PCI bridge=0 time_init: decrementer frequency = 16.504254 MHz Console: colour dummy device 80x25 Calibrating delay loop... 109.77 BogoMIPS Memory: 61124k available (1688k kernel code, 788k data, 264k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Zorro: Probing AutoConfig expansion devices: 1 device Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 Console: switching to colour frame buffer device 80x25 fb0: Amiga AGA frame buffer device, using 1280K of video memory clgen: Driver for Cirrus Logic based graphic boards, v1.9.8 Couldn't find PCI device pty: 256 Unix98 ptys configured block: queued sectors max/low 40496kB/13498kB, 128 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide0: Gayle IDE interface (A1200 style) hda: QUANTUM FIREBALL_TM2550A, ATA DISK drive hdb: QUANTUM FIREBALL1280A, ATA DISK drive ide0 at 80da0000 on irq 0x0000000c hda: 5008752 sectors (2564 MB) w/76KiB Cache, CHS=4969/16/63 hdb: 2503872 sectors (1282 MB) w/83KiB Cache, CHS=2484/16/63 Partition check: hda: RDSK hda1 hda2 hda3 hdb: RDSK hdb1 hdb2 FD: probing units found <5>fd: drive 0 didn't identify, setting default ffffffff fd0 Looking for PCMCIA ethernet card : <<<<<<<<<<<<<<<<<<<< ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2001-03-30 14:11 Message: Logged In: NO I have the same problem with 2.4.2 (the one which can be downloaded from here). I have to remove my PCMCIA ethernet to be able to boot up. Both 2.2.10 and 2.4.1 crashes for me when trying to boot from them after install. So the only time I can use my ethernet card is when I'm install LinuxPPC with 2.2.10 ---------------------------------------------------------------------- Comment By: Michel Daenzer (mdaenzer) Date: 2001-02-01 15:47 Message: Please include the dmesg and .config with this bug. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105907&aid=230693&group_id=5907 |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X