hi,
okay! I#ve made a chang - will commit the CVS in a few
minutes....however i've now hit a new problem...and i've
never seen output like this before on dmesg...
Searching for SAVEKMSG magic...
Found 3622 bytes at 0x001e0010
>>>>>>>>>>>>>>>>>>>>
Linux version 2.4.17 (root@debalan) (gcc version 2.95.4 20011006 (Debian
prerelease)) #2 Fri Feb 8 21:49:17 GMT 2002
Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD
MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA ZORRO
On node 0 totalpages: 24320
zone(0): 24320 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda12 -d debug=mem ide=doubler hdd=ide-scsi
video=pm2fb:mode:1024x768-60 video=amifb:off 60nsram
ide_setup: ide=doubler : Enabled support for IDE doublers
ide_setup: hdd=ide-scsi
ioremap: fffc0000 (00001000) -> fdfff000
ioremap: fffe0000 (00001000) -> fdffe000
APUS: BATs=1, BUS=60MHz, RAM=60ns, PCI bridge=1
time_init: decrementer frequency = 15.003664 MHz
Warning: real time clock seems stuck!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Console: colour dummy device 80x25
Calibrating delay loop... 159.74 BogoMIPS
Memory: 92760k available (1852k kernel code, 756k data, 280k init, 0k
highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Memory resource not set for host bridge 0
apus_pcibios_fixup: PCI mem resource requested
PCI: Cannot allocate resource region 1 of PCI bridge 0
PCI: resource is e0000000..fffc0000 (200), parent c0225c1c
PCI:00:01.0: Resource 0: ef000000-ef01ffff (f=200)
PCI:00:01.0: Resource 1: e0000000-e07fffff (f=200)
PCI:00:01.0: Resource 2: e1000000-e17fffff (f=200)
PCI: Switching off ROM of 00:01.0
Zorro: Probing AutoConfig expansion devices: 8 devices
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[fffa0000:fffaffff]
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[fffc0000:fffdffff]
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[e0000000:e07fffff]
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[e0800000:e0ffffff]
Zorro: Address space collision on device Zorro device 21406500 (Phase 5)
[e1000000:e101ffff]
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
ioremap: fffc0000 (00001000) -> c601a000
ioremap: fffe0000 (00001000) -> c601c000
ioremap: e0000000 (00800000) -> c601e000
ioremap: ef010000 (00010000) -> c681f000
Console: switching to colour frame buffer device 128x48
fb0: CVisionPPC/BVisionPPC (Permedia2), using 8192K of video memory.
clgen: Driver for Cirrus Logic based graphic boards, v1.9.9.1
Couldn't find PCI device
pty: 256 Unix98 ptys configured
Commodore A2232 driver initializing.
Total: 0 A2232 boards initialized.
Amiga-builtin serial driver version 4.30
ttyS00 is the amiga builtin serial port
Amiga mouse installed.
Generic RTC Driver v1.02
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: Gayle IDE interface (A1200 style)
ide1: IDE doubler
+++ Probing for IDE doubler... probe returned 0x6620 (PLEASE REPORT THIS!!)
hda: FUJITSU MPE3084AE, ATA DISK drive
last_ipl[2] already set to 2f, now 2d!
302: 2 -2 2 -2 2 -2 2 -2 2 -2 2 -2 2 3 -3 2
last_ipl[2] already set to 2f, now 2d!
2809: 2 -2 2 -2 2 -2 2 -2 2 -2 2 -2 2 3 -3 2
amikeyb: unknown keyboard communication code 0xff
<<<<<<<<<<<<<<<<<<<<
look at those nice lines at the bottom..nasty.
i've highlighted a line about the real time clock... my change
should be legal...but it appears quite a bit has been modified
in the RTC section of the krnel...and it doesnt like the BlizzardPPC
clock any more
alan
|
