#18 Failure when probing NE2000 PCMCIA Ethernet card
I can't run kernel v2.4 on my system. This is the debug
output from serial port:
--- cut ---
Memory BAT mapping: BAT2=32Mb, BAT3=16Mb, residual:
15Mb
Linux version 2.4.20-apus (root@thor) (gcc version 2.95.
4 20011002 (Debian prerelease)) #1 Sun Dec 15 00:15:14
UTC 2002
Amiga hardware found: [A1200] VIDEO BLITTER AUDIO
FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL
A2000_CLK CHIP_RAM PAULA LISA ALICE_PAL PCMCIA
ZORRO
On node 0 totalpages: 16128
zone(0): 16128 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram video=amifb:vga
ide=doubler debug=ser
ide_setup: ide=doubler : Enabled support for IDE doublers
APUS: BATs=1, BUS=60MHz, RAM=70ns, PCI bridge=0
time_init: decrementer frequency = 15.003534 MHz
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 159.74 BogoMIPS
Memory: 60168k available (1860k kernel code, 716k data,
148k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536
bytes)
Inode cache hash table entries: 4096 (order: 3, 32768
bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192
bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096
bytes)
Page-cache hash table entries: 16384 (order: 4, 65536
bytes)
POSIX conformance testing by UNIFIX
Zorro: Probing AutoConfig expansion devices: 1 device
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.
039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
parport_gvpio_init : found = 0
Console: switching to colour frame buffer device 80x30
fb0: Amiga AGA frame buffer device, using 1280K of video
memory
clgen: Driver for Cirrus Logic based graphic boards, v1.9.
9.1
clgen: no supported board found.
pty: 256 Unix98 ptys configured
Commodore A2232 driver initializing.
Total: 0 A2232 boards initialized.
Amiga-builtin serial driver version 4.30
ttyS00 is the amiga builtin serial port
Amiga mouse installed.
Generic RTC Driver v1.05
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes;
override with idebus=xx
ide0: Gayle IDE interface (A1200 style)
ide1: IDE doubler
+++ Probing for IDE doubler... probe returned 0x2020
(PLEASE REPORT THIS!!)
probing for hda: present=0, media=32, probetype=ATA
hda: WDC AC310200R, ATA DISK drive
probing for hdb: present=0, media=32, probetype=ATA
probing for hdb: present=0, media=32, probetype=ATAPI
probing for hdc: present=0, media=32, probetype=ATA
probing for hdc: present=0, media=32, probetype=ATAPI
hdc: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
probing for hdd: present=0, media=32, probetype=ATA
probing for hdd: present=0, media=32, probetype=ATAPI
hdd: ASUS CD-S400/A, ATAPI CD/DVD-ROM drive
ide0 at 80da0000 on irq 0x0000000c
ide1 at 80da1000 on irq 0x0000000c (shared with ide0)
hda: 20044080 sectors (10263 MB) w/512KiB Cache,
CHS=19885/16/63
hdd: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
hdc: No disk in drive
hdc: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size,
2941 rpm
Partition check:
hda: RDSK hda1 hda2 hda3 hda4 hda5 hda6
FD: probing units
found fd0
Looking for PCMCIA ethernet card : ethernet PCMCIA
card inserted
apne.c:v1.1 7/10/98 Alain Malek (Alain.Malek@cryogen.
ch)
PCMCIA NE*000 ethercard probeOops: kernel access of
bad area, sig: 11
NIP: C0248850 XER: 00000000 LR: C0248848 SP:
C3E1BE80 REGS: c3e1bdd0 TRAP: 0300 Not tainted
MSR: 00009072 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0000031F, DSISR: 20000000
TASK = c3e1a000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0248848 C3E1BE80 C3E1A000 0000001D
00001072 00000001 C3E1BE50 C0260000
GPR08: 00000D47 C0260000 00000023 00000225
44002029 76261FF8 761C4434 3C894A00
GPR16: 76DF1DC0 0000004C 00000000 00000000
003FF000 FFFFFD6C 0000001D 76C00000
GPR24: 00000000 00000000 76C00000 00000002
C0173E24 C0226AA8 C022691C 00000300
Call backtrace:
C0248848 C02487E0 C0248438 C02484AC C025395C
C02479F4 C023E5B4
C023E600 C0003BDC C0008658
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..
BTW, i use experience problems rebooting the Amiga
from Linux. Even when i press reset button (i have A1200
in a tower), Amiga does not boot to the AmigaOS, it
shows green screen and halts. I have to switch off the
power. That's why i can't use dmesg.
