[LinksOS CVS Commit]kernel/hal/x86 gdt.h,NONE,1.1

[<ke...@to...>]

Update of /cvsroot/linksos/kernel/hal/x86
In directory rix.tossell.net:/tmp/cvs-serv32113/hal/x86

Added Files:
	gdt.h 
Log Message:
Title: gdt.h 
Changes: Moved gdt.h out of the prototypes dir and into the x86 dir.

Effects: Minimizing pollution to other arch's.

a=kennyt


--- NEW FILE: gdt.h ---
#ifndef __GDT_H
#define __GDT_H

/*
 * The desc_table, stnd_desc and gate_desc macros piece together a descriptor
 * table.
 *
 * Example usage:
 *
 *  desc_table(GDT, 2) {
 *     stnd_desc(0, 0, 0),
 *     stnd_desc(0, 0xfffff, (D_CODE + D_READ + D_BIG + D_BIG_LIM))
 *  };
 *
 * gate_desc(offset, selector, control)   ;For gate descriptors
 * stnd_desc(base, limit, control)	  ;For all other descriptors
 *
 *  base    is the full 32 bit base address of the segment
 *  limit   is one less than the segment length in 1 or 4K byte units
 *  control the sum of all the "D_" equates which apply (for call gates, you
 *          also add the "parameter dword count" to flags).
 *
 * desc_table(symbol, size)               ;Start a descriptor table
 *
 *  symbol  is the C symbol that is used for this descriptor table
 *  size    is the amount of descriptors defined in this table
 *
 * The descriptor table can be accessed in the code through the symbol [symbol],
 * which is defined as an array of DT_entry unions.  Every DT_entry union can
 * contain either a normal descriptor, gate descriptor, or some other value
 * which is 64 bits in size (this could be used to store custom info in the
 * dummy descriptor of the GDT, for instance.)
 *
 * The dummy value can be inserted like this:
 *
 *  desc_table(GDT, 2) {
 *     {dummy: 0x1234567890123456},
 *     ...
 *  };
 */


/*
 *  Each descriptor should have exactly one of next 8 codes to define the
 *  type of descriptor
 */

#define D_LDT   0x200   /* LDT segment        */
#define D_TASK  0x500   /* Task gate          */
#define D_TSS   0x900   /* TSS                */
#define D_CALL  0x0C00  /* 386 call gate      */
#define D_INT   0x0E00  /* 386 interrupt gate */
#define D_TRAP  0x0F00  /* 386 trap gate      */
#define D_DATA  0x1000  /* Data segment       */
#define D_CODE  0x1800  /* Code segment       */


/*
 *  Descriptors may include the following as appropriate:
 */

#define D_DPL3         0x6000   /* DPL3 or mask for DPL                    */
#define D_DPL2         0x4000   /* DPL2 or mask for DPL                    */
#define D_DPL1         0x2000   /* DPL1 or mask for DPL                    */
#define D_PRESENT      0x8000   /* Present                                 */
#define D_NOT_PRESENT  0x8000   /* Not Present                             */
                                /* Note, the PRESENT bit is set by default */
                                /* Include NOT_PRESENT to turn it off      */
                                /* Do not specify D_PRESENT                */


/*
 *  Segment descriptors (not gates) may include:
 */

#define D_ACC      0x100  /* Accessed (Data or Code)          */

#define D_WRITE    0x200  /* Writable (Data segments only)    */
#define D_READ     0x200  /* Readable (Code segments only)    */
#define D_BUSY     0x200  /* Busy (TSS only)                  */

#define D_EXDOWN   0x400  /* Expand down (Data segments only) */
#define D_CONFORM  0x400  /* Conforming (Code segments only)  */

#define D_BIG      0x40	  /* Default to 32 bit mode           */
#define D_BIG_LIM  0x80	  /* Limit is in 4K units             */


/*
 *  Now we define the structures for descriptors and gates:
 */

struct x86_desc {
   unsigned short limit_low;     /* limit 0..15    */
   unsigned short base_low;      /* base  0..15    */
   unsigned char base_med;       /* base  16..23   */
   unsigned char access;         /* access byte    */
   unsigned int limit_high:4;    /* limit 16..19   */
   unsigned int granularity:4;   /* granularity    */
   unsigned char base_high;      /* base 24..31    */
} __attribute__ ((packed));


struct x86_gate {
   unsigned short offset_low;   /* offset 0..15    */
   unsigned short selector;     /* selector        */	
   unsigned short access;       /* access flags    */
   unsigned short offset_high;  /* offset 16..31   */
} __attribute__ ((packed));


/*
 *  Descriptor tables are basically arrays of either standard or gate
 *  descriptors;  The exception is the first descriptor, which is a
 *  'dummy' and can be filled with anything without crashing the machine.
 *
 *  We define the union DT_entry as a general type of entry in a descriptor
 *  table;  It can contain a normal descriptor, a gate descriptor, or any
 *  64-bit number (for defining the dummy entries, if neccessary.)
 */

union DT_entry {
   struct x86_desc desc;     /* Normal descriptor */
   struct x86_gate gate;     /* Gate descriptor   */
   unsigned long long dummy; /* Any other info    */
};


/*
 * Now we perform the macro magic of the day.
 */

#define desc_table(name,length) union DT_entry name[length] = 
#define stnd_desc(base, limit, control) {desc: {(limit & 0xffff), (base & 0xffff), ((base >> 16) & 0xff), \
                                               ((control+D_PRESENT) >> 8), (limit >> 16), \
                                               ((control & 0xff) >> 4), (base >> 24)}}
#define gate_desc(offset, selector, control) {gate: {(offset & 0xffff), selector, \
                                                     (control+D_PRESENT), (offset >> 16) }}

/* These are bound to look a bit cryptic, so I'll just show what the result
 * would look like:
 *
 * desc_table(GDT, 3) {
 *    stnd_desc(base, limit, control),
 *    stnd_desc(base, limit, control),
 *    gate_desc(offset, selector, control)
 * };
 *
 * ... would produce something looking like: 
 *
 * union DT_entry GDT[3] = {
 *    {desc: {limit_low, base_low, base_med, access, limit_high, granularity, base_high}},
 *    {desc: {limit_low, base_low, base_med, access, limit_high, granularity, base_high}},
 *    {gate: {offset_low, selector, word_count, access, offset_high}}
 * }; 
 *
 * The values are conveted using a bit of cryptic, but straightforward magic.
 */

#endif