[Libnodave-users] Sending HW-Config over LibNoDave?

[<chr...@if...>]

Dear all LibNoDave Users and Dear LibNoDave Creator(s).

My coworkers and i started to use LibNoDave to work with an S7 - 319 PN/DP.
Everything works fine so fare.
We connected an PC over Ethernet to the Profinet plug on the PLC. Then we
used libnodave to read/write I/O- and other memoryblocks succesfully.

We also now that it is possible to load program blocks to the PLC.
But we are wondering:
Is it possible to upload an entire project and/or the hardware
configuration into the PLC using libnodave?


If someone has done this before or has an idea/comment, please send me an
email.

Thanks a lot in advance :)


With best wishes

C. Hayna

ifm ecomatic gmbh

Im Heidach 18
88079 Kressbronn
Germany

Tel.  +49 (7543) 608-584
Fax  +49 (7543) 608-240
***Achtung: Bitte beachten Sie unsere neuen Telefon- und Faxnummern!

E-Mail: chr...@if...
Homepage: www.ifm.com
_______________________________________

Sitz der Gesellschaft ist Kressbronn
HR B 630930 Amtsgericht Ulm
Geschäftsführer:
Bernd Boolzen, Andreas Daum
_______________________________________