Re: [leaf-user] USB image file

[jeanrocco jr <bla...@gm...>]

Hello again,

Ok I just tried "Upgrade software" in the webconf page. It offered me to
upgrade to 7.4.0. It had some errors, I *did a lrcfg s), and rebooted.
Results: 7.4.0 is there but *the modules are not loading, so no eth(n)
etc...

So it's back to the standard method to generate an updated system USB. But
the image file can still be used as a perfectly working firewall, it'll
teach and familiarize you with LEAF.

Bye
jeanrocco

On Mon, Aug 4, 2025 at 6:24 PM marko via leaf-user <
lea...@li...> wrote:

> For usb on a standard x86 system with syslinux as the bootloader use:
>
> Bering-uClibc_7.5.0_x86_64_syslinux_vga.tar.gz[1]
>
> you need a FAT32 formatted bootable usb with syslinux installed.
>
> The section in the user guide "preparing the flash media"
> shows you how to format, install syslinux and the mbr
>
>
> good luck!
>
> Marko
>
>
> On Tuesday, 5 August 2025 6:58:39 AM AEST Sławek Adamski wrote:
> > Sorry, I don't know how to continue this thread 😇.
> >
> > Dear Marko big thanks for your participation. But...
> >
> > I'm reading Bering-uClibc 7.x - User Guide
> > <https://bering-uclibc.zetam.org/wiki/Bering-uClibc_7.x_-_User_Guide>.
> > There, in Installing the Disk Image
> > <
> https://bering-uclibc.zetam.org/wiki/Bering-uClibc_7.x_-_User_Guide_-_Insta
> > lling_the_Disk_Image> is:
>
> > The bootable images for USB:
> >
> >   * *Bering-uClibc_x86_ser.img*
> >
> > <
> https://sourceforge.net/projects/leaf/files/Bering-uClibc/7.0.1/Bering-uCl
> > ibc_x86_ser.img/download>
>  * *Bering-uClibc_x86_vga.img*
> >
> > <
> https://sourceforge.net/projects/leaf/files/Bering-uClibc/7.0.1/Bering-uCl
> > ibc_x86_vga.img/download>
>
> > and those files are absent, for example Bering-uClibc_x86_vga.img :
> >
> >
> > Yes, I found files with these names in 7.0.0, but I don't think they
> > should be used. They're over 4 years old.
> >
> > W dniu 03.08.2025 o 14:18, lea...@li...
> pisze:
> >
> > > Message: 1
> > > Date: Sun, 3 Aug 2025 01:24:59 +0200
> > > From: S?awek Adamski<sa...@wa...>
> > > To:lea...@li...
> > > Subject: [leaf-user] USB image file
> > > Message-ID:<287...@wa...>
> > > Content-Type: text/plain; charset=UTF-8; format=flowed
> > >
> > >
> > >
> > > Nine years ago, I made myself a Leaf CD. It still works. It's high time
> > > I upgraded to a newer version. I'd like to create a bootable USB drive.
> > > But I can't find the img files, namely Bering-uClibc_x86_ser.img and
> > > Bering-uClibc_x86_vga.img. It's strange, because the manual says you
> > > should start with that image.
> > >
> > >
> > >
> > >
> > >
> > > ------------------------------
> > >
> > >
> > >
> > > Message: 2
> > > Date: Sun, 03 Aug 2025 13:27:56 +1000
> > > From: marko<le...@me...>
> > > To:lea...@li...
> > > Subject: Re: [leaf-user] USB image file
> > > Message-ID: <12716093.O9o76ZdvQC@chambourcin>
> > > Content-Type: text/plain; charset="UTF-8"
> > >
> > >
> > >
> > > main site:https://leaf.zetam.org/bering-uclibc/[1]
> > >
> > >
> > >
> > > downloads:
> https://sourceforge.net/projects/leaf/files/Bering-uClibc/[2]
> > >
> > >
> > >
> > >
> > > On Sunday, 3 August 2025 9:24:59 AM AEST S?awek Adamski via leaf-user
> > > wrote:
> >
> > >> Nine years ago, I made myself a Leaf CD. It still works. It's high
> time
> > >> I upgraded to a newer version. I'd like to create a bootable USB
> drive.
> > >> But I can't find the img files, namely Bering-uClibc_x86_ser.img and
> > >> Bering-uClibc_x86_vga.img. It's strange, because the manual says you
> > >> should start with that image.
> > >>
> > >>
> > >>
> > >>
> > >>
> ------------------------------------------------------------------------
> > >> leaf-user mailing list:lea...@li...
> > >> https://lists.sourceforge.net/lists/listinfo/leaf-user
> > >> Support Request --http://leaf-project.org/
> > >
> > >
> > >
> > >
> > > --------
> > > [1]https://leaf.zetam.org/bering-uclibc/
> > > [2]https://sourceforge.net/projects/leaf/files/Bering-uClibc/
> ------------------------------------------------------------------------
> leaf-user mailing list: lea...@li...
> https://lists.sourceforge.net/lists/listinfo/leaf-user
> Support Request -- http://leaf-project.org/
>