Menu
▾
▴
Re: [leaf-user] USB image file
|
From: marko <le...@me...> - 2025-08-05 06:09:16
|
burning the iso cd image to a memory stick usually works. Reset the RO attiributes to all the files or the system will be read only. Even read only, you can utilise the leaf config menu entry to create new memory sticks. best marko On Tuesday, 5 August 2025 2:00:41 PM AEST jeanrocco jr wrote: > Hello Marko, Awek and Leaf Users, > > Awek is right there was supposed to be .img files for serial or vga screen. > It didn't happen as we planned, so the right way of preparing a USB key is > as Marko describes: The section in the user guide "preparing the flash > media" shows you how to format, install syslinux and the mbr. > > But some leftover .img files are still available in > https://sourceforge.net/projects/leaf/files/Bering-uClibc/ in 7.0.0 > (Bering-uClibc_x86_64_vga.img or Bering-uClibc_x86_64_ser.img). These files > are for x86_64 and will boot a system called "leafinstaller" . These .img > files can be copied on a USB key with "make bootable USB stick" , > Raspberrypiimager, BalenaEtcher or even "dd" . Booting it will get you in a > preconfigured system which can be used "carefully" (I didn't check it) as a > firewall. It will also help you generate another three partitions USB key ( > in lrcfg menu, use " i) install to disk (experimental) " which will give > you a locally accessible target that you can easily set up from a web > browser. Make sure to set up the "rules in shorwall" before connecting it > to the net and using it as a firewall. > > I'm including a quick (newbie and crude ) guide to set this up if you ever > want to try it. > > bonsoir a tous > jeanrocco > > > > > > On Mon, Aug 4, 2025 at 6:24 PM marko via leaf-user < > > lea...@li...> wrote: > > For usb on a standard x86 system with syslinux as the bootloader use: > > > > Bering-uClibc_7.5.0_x86_64_syslinux_vga.tar.gz[1] > > > > you need a FAT32 formatted bootable usb with syslinux installed. > > > > The section in the user guide "preparing the flash media" > > shows you how to format, install syslinux and the mbr > > > > > > good luck! > > > > Marko > > > > On Tuesday, 5 August 2025 6:58:39 AM AEST Sławek Adamski wrote: > > > Sorry, I don't know how to continue this thread 😇. > > > > > > Dear Marko big thanks for your participation. But... > > > > > > I'm reading Bering-uClibc 7.x - User Guide > > > <https://bering-uclibc.zetam.org/wiki/Bering-uClibc_7.x_-_User_Guide>. > > > There, in Installing the Disk Image > > > < > > > > https://bering-uclibc.zetam.org/wiki/Bering-uClibc_7.x_-_User_Guide_-_Inst > > a > > > > > lling_the_Disk_Image> is: > > > > > > The bootable images for USB: > > > * *Bering-uClibc_x86_ser.img* > > > > > > < > > > > https://sourceforge.net/projects/leaf/files/Bering-uClibc/7.0.1/Bering-uCl > > > > > ibc_x86_ser.img/download> > > > > * *Bering-uClibc_x86_vga.img* > > > > > < > > > > https://sourceforge.net/projects/leaf/files/Bering-uClibc/7.0.1/Bering-uCl > > > > > ibc_x86_vga.img/download> > > > > > > and those files are absent, for example Bering-uClibc_x86_vga.img : > > > > > > > > > Yes, I found files with these names in 7.0.0, but I don't think they > > > should be used. They're over 4 years old. > > > > > > W dniu 03.08.2025 o 14:18, lea...@li... > > > > pisze: > > > > Message: 1 > > > > Date: Sun, 3 Aug 2025 01:24:59 +0200 > > > > From: S?awek Adamski<sa...@wa...> > > > > To:lea...@li... > > > > Subject: [leaf-user] USB image file > > > > Message-ID:<287...@wa...> > > > > Content-Type: text/plain; charset=UTF-8; format=flowed > > > > > > > > > > > > > > > > Nine years ago, I made myself a Leaf CD. It still works. It's high > > > > time > > > > I upgraded to a newer version. I'd like to create a bootable USB > > > > drive. > > > > But I can't find the img files, namely Bering-uClibc_x86_ser.img and > > > > Bering-uClibc_x86_vga.img. It's strange, because the manual says you > > > > should start with that image. > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------ > > > > > > > > > > > > > > > > Message: 2 > > > > Date: Sun, 03 Aug 2025 13:27:56 +1000 > > > > From: marko<le...@me...> > > > > To:lea...@li... > > > > Subject: Re: [leaf-user] USB image file > > > > Message-ID: <12716093.O9o76ZdvQC@chambourcin> > > > > Content-Type: text/plain; charset="UTF-8" > > > > > > > > > > > > > > > > main site:https://leaf.zetam.org/bering-uclibc/[1] > > > > > > downloads: > > https://sourceforge.net/projects/leaf/files/Bering-uClibc/[2] > > > > > > On Sunday, 3 August 2025 9:24:59 AM AEST S?awek Adamski via leaf-user > > > > > > > > wrote: > > > >> Nine years ago, I made myself a Leaf CD. It still works. It's high > > > > time > > > > > >> I upgraded to a newer version. I'd like to create a bootable USB > > > > drive. > > > > > >> But I can't find the img files, namely Bering-uClibc_x86_ser.img and > > > >> Bering-uClibc_x86_vga.img. It's strange, because the manual says you > > > >> should start with that image. > > > > ------------------------------------------------------------------------ > > > > > >> leaf-user mailing list:lea...@li... > > > >> https://lists.sourceforge.net/lists/listinfo/leaf-user > > > >> Support Request --http://leaf-project.org/ > > > > > > > > -------- > > > > [1]https://leaf.zetam.org/bering-uclibc/ > > > > [2]https://sourceforge.net/projects/leaf/files/Bering-uClibc/ > > > > ------------------------------------------------------------------------ > > leaf-user mailing list: lea...@li... > > https://lists.sourceforge.net/lists/listinfo/leaf-user > > Support Request -- http://leaf-project.org/ |
