From: <joa...@au...> - 2006-08-08 12:22:16
|
I=B4m using BGP with CISCO routers. Attached is my config file: # Current configuration: set debug 0 set log_file "/var/log/l2tpns" set pid_file "/var/run/l2tpns.pid" set random_device "/dev/urandom" set l2tp_secret "xxxxxxxxxx" set l2tp_mtu 1434 set ppp_restart_time 5 set ppp_max_configure 3 set ppp_max_failure 5 set primary_dns 192.168.101.2 set secondary_dns 192.168.101.6 set primary_radius 127.0.0.1 set secondary_radius 192.168.101.6 set primary_radius_port 1645 set secondary_radius_port 1645 set radius_accounting no set radius_interim 0 set radius_secret "yyyyyyyyyy" set radius_authtypes "pap, chap" set radius_dae_port 3799 set allow_duplicate_users no set bind_address 192.168.101.2 set peer_address 192.168.101.2 set send_garp yes set throttle_speed 0 set throttle_buckets 6000 set accounting_dir "/var/run/l2tpns/acct" set setuid 0 set dump_speed no set multi_read_count 10 set scheduler_fifo no set lock_pages yes set icmp_rate 0 set packet_limit 0 set cluster_address 239.192.13.13 set cluster_interface "eth0" set cluster_mcast_ttl 1 set cluster_hb_interval 5 set cluster_hb_timeout 150 set cluster_master_min_adv 1 set ipv6_prefix :: # Plugins # BGP router bgp 64512 neighbour 192.168.102.1 remote-as 64512 router bgp 64512 neighbour 192.168.102.2 remote-as 64512 # Filters # end=20 -----Mensagem original----- De: l2t...@li... = [mailto:l2t...@li...] Em nome de Brendan = O'Dea Enviada em: ter=E7a-feira, 8 de agosto de 2006 09:17 Para: l2t...@li... Assunto: Re: [l2tpns-users] Counters On Tue, Aug 08, 2006 at 09:05:07AM -0300, Jo=E3o Romariz Sobrinho wrote: >I believe I have a problem with cluster config. At this moment we have = >2 machines in cluster. I believe that when master has, at least, one=20 >slave, it will stop processing the sessions traffic and pass this task=20 >to slave. Shouldn=B4t this cause slave "show counters" to start=20 >increasing because of the traffis of the sessions? I don=B4t see this=20 >happening, only master counters are increasing. Are you using BGP or GARP? If GARP you need to static route your pool addresses via the VIP = (bind_address). Also check the send_garp option. --bod -------------------------------------------------------------------------= Using Tomcat but need to do more? Need to support web services, = security? Get stuff done quickly with pre-integrated technology to make your job = easier Download IBM WebSphere Application Server v.1.0.1 based on Apache = Geronimo http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D= 121642 _______________________________________________ L2tpns-users mailing list L2t...@li... https://lists.sourceforge.net/lists/listinfo/l2tpns-users |