Re: [Kaldi-users] data preparation problem

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

This looks like a problem with your machine or the toolchain that was used
to compiled kaldi (especially the compiler and/or the glibc).
If you have experience with debugging, you can run the command again,
generate core dump (using ulimit –c unlimited) and load it into gdb to
figure out the details.
What distribution and gcc and glibc  are you using?

y.

On Wed, Jul 16, 2014 at 10:18 AM, Zibo Meng <mzb...@gm...> wrote:

> Hi,
>
> After I created the lang directory, I used steps/train_mono.sh --nj 4
> data/train.1k data/lang exp/mono. But I got the error message as follows:
>
> steps/train_mono.sh --nj 4 data/train.1k data/lang exp/mono
> steps/train_mono.sh --nj 4 data/train.1k data/lang exp/mono
> vads =  data/train.1k/split4/1/vad.scp
> vads =  data/train.1k/split4/1/vad.scp data/train.1k/split4/2/vad.scp
> vads =  data/train.1k/split4/1/vad.scp data/train.1k/split4/2/vad.scp
> data/train.1k/split4/3/vad.scp
> vads =  data/train.1k/split4/1/vad.scp data/train.1k/split4/2/vad.scp
> data/train.1k/split4/3/vad.scp data/train.1k/split4/4/vad.scp
> steps/train_mono.sh: Initializing monophone system.
> steps/train_mono.sh: Compiling training graphs
> steps/train_mono.sh: Aligning data equally (pass 0)
> steps/train_mono.sh: Pass 1
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 2
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 3
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 4
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 5
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 6
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 7
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 8
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 9
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 10
> steps/train_mono.sh: Aligning data
> steps/train_mono.sh: Pass 11
> steps/train_mono.sh: Pass 12
> steps/train_mono.sh: Aligning data
> *** Error in `gmm-acc-stats-ali': free(): corrupted unsorted chunks:
> 0x0000000001e10e60 ***
> ======= Backtrace: =========
> /lib64/libc.so.6[0x367887d0b8]
> gmm-acc-stats-ali(_ZN5kaldi6VectorIfE7DestroyEv+0x27)[0x59f127]
> gmm-acc-stats-ali(_ZN5kaldi6VectorIfED1Ev+0x19)[0x4da151]
>
> gmm-acc-stats-ali(_ZNK5kaldi7DiagGmm14LogLikelihoodsERKNS_10VectorBaseIfEEPNS_6VectorIfEE+0x1e6)[0x4fc156]
>
> gmm-acc-stats-ali(_ZNK5kaldi7DiagGmm19ComponentPosteriorsERKNS_10VectorBaseIfEEPNS_6VectorIfEE+0x10a)[0x4fc946]
>
> gmm-acc-stats-ali(_ZN5kaldi12AccumDiagGmm18AccumulateFromDiagERKNS_7DiagGmmERKNS_10VectorBaseIfEEf+0x118)[0x507410]
>
> gmm-acc-stats-ali(_ZN5kaldi14AccumAmDiagGmm16AccumulateForGmmERKNS_9AmDiagGmmERKNS_10VectorBaseIfEEif+0x9e)[0x4f2ec0]
> gmm-acc-stats-ali(main+0x56c)[0x4d7aec]
> /lib64/libc.so.6(__libc_start_main+0xf5)[0x3678821b45]
> gmm-acc-stats-ali[0x4d74b9]
>
> Can you please tell me what went wrong here?
>
> Thank you so much!
>
> Zibo
>
>
>
> On Fri, Jul 11, 2014 at 11:24 AM, Zibo Meng <mzb...@gm...> wrote:
>
>> Hi,
>>
>> I got another problem.
>>
>> When I tried make_mfcc.sh to create the feats.scp files it did not work.
>>
>> I checked the log file where it said some thing like:
>>
>> compute-mfcc-feats --verbose=2 --config=conf/mfcc.conf
>> scp,p:exp/make_mfcc/train/wav_data.1.scp ark:-
>> ERROR (compute-mfcc-feats:Read():wave-reader.cc:144) WaveData: can read
>> only PCM data, audio_format is not 1: 65534
>> WARNING (compute-mfcc-feats:Read():feat/wave-reader.h:148) Exception
>> caught in WaveHolder object (reading).
>> WARNING (compute-mfcc-feats:LoadCurrent():util/kaldi-table-inl.h:232)
>> TableReader: failed to load object from 'test.wav'
>>
>> Then I checked the attributes of my test.wav file which were as follows:
>> Input File     : 'test.wav'
>> Channels       : 1
>> Sample Rate    : 48000
>> Precision      : 24-bit
>> Duration       : 00:03:30.09 = 10084224 samples ~ 15756.6 CDDA sectors
>> File Size      : 30.3M
>> Bit Rate       : 1.15M
>> Sample Encoding: 24-bit Signed Integer PCM
>>
>> Can you tell me what should I modify to my audio files. Thank you so much!
>>
>> Best,
>>
>> Zibo
>>
>>
>>
>> On Thu, Jul 10, 2014 at 3:37 PM, Zibo Meng <mzb...@gm...> wrote:
>>
>>> Hi,
>>>
>>> I am preparing the data for dnn training using my own data set. I
>>> followed the instruction on http://kaldi.sourceforge.net/data_prep.html.
>>>
>>> I created the file "text" as the first 3 lines:
>>> S002-U-000300-000470 OH
>>> S002-U-000470-000630 I'D
>>> S002-U-000630-000870 LIKE
>>>
>>> the wav.scp file:
>>> S002-U <path to the corresponding wav file>
>>> S002-O <path to the corresponding wav file>
>>> S003-U <path to the corresponding wav file>
>>>
>>> and the utt2spk file:
>>> S002-U-000300-000470 002-U
>>> S002-U-000470-000630 002-U
>>> S002-U-000630-000870 002-U
>>>
>>> Then I used utt2spk_to_spk2utt.pl to create the spk2utt file.
>>> Everything went well until I tried to use the mak_mfcc.sh to create the
>>> feats.scp file where I got the error message like:
>>>
>>> utils/validate_data_dir.sh: file data/utt2spk is not in sorted order or
>>> has duplicates
>>>
>>> seems like my utt2spk file could not pass through the validation.
>>>
>>> Can any body help me out of here? Thank you so much.
>>>
>>> Best,
>>>
>>> Zibo
>>>
>>
>>
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> http://p.sf.net/sfu/bds
> _______________________________________________
> Kaldi-users mailing list
> Kal...@li...
> https://lists.sourceforge.net/lists/listinfo/kaldi-users
>
>