Hello,
does k-acpi update the other values ?
Or does k-acpi nothing if you press the update-Button ?
If K-acpi does not update all values open the conf dialog
and press the
OK -Button.
If K-acpi update all values (the AC-adapter is NOT
connected to the laptop)
but k-acpi does not the update remaining time then we
have a problem. :-(
->You use Suse 8.0, what Kernel and what
ACPI-subsystem do you use ?
ACPI-subsystem version can you find out with cat
/proc/acpi/info
I hope it work.
Janas
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
If I unplug the powersupply not changes are made. Also the
remaining working time isn't updated.
> Or does k-acpi nothing if you press the update-Button ?
No! That's works fine. If I press the reload button, the
remaining
time will change or the power-supply status will be updated.
> If K-acpi does not update all values open the conf dialog
> and press the OK -Button.
I've done this but there are no automatic changes!
> If K-acpi update all values (the AC-adapter is NOT
> connected to the laptop) but k-acpi does not the update
> remaining time then we have a problem. :-(
That's right, I think I / we have a problem ...
> You use Suse 8.0, what Kernel and what
> ACPI-subsystem do you use ?
Hi,
>I'm using SuSe 8.0 with Kernel 2.4.18 with the
>acpi-kernel-patches from:
>http://www.holik.at/lappy/SuSE80-acpi-20020611_pciirq-2.4.18.diff.gz
I use with patch too.
Ok, my last idea:
start kacpi, open the conf-dialog, set the update time to 10
sec. Press the apply-button, than the OK-button. Than
close the kacpi the FILE/QUIT. Than restart the app.
If this will not work:
make a cat $HOME/.kde/share/config/kacpirc and send me
an email to jonasge@gmx.net. (i'm german)
cu,
Jonas
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Logged In: YES
user_id=509024
Hello,
does k-acpi update the other values ?
Or does k-acpi nothing if you press the update-Button ?
If K-acpi does not update all values open the conf dialog
and press the
OK -Button.
If K-acpi update all values (the AC-adapter is NOT
connected to the laptop)
but k-acpi does not the update remaining time then we
have a problem. :-(
->You use Suse 8.0, what Kernel and what
ACPI-subsystem do you use ?
ACPI-subsystem version can you find out with cat
/proc/acpi/info
I hope it work.
Janas
Logged In: YES
user_id=339076
HI,
jonasge wrote:
> does k-acpi update the other values ?
If I unplug the powersupply not changes are made. Also the
remaining working time isn't updated.
> Or does k-acpi nothing if you press the update-Button ?
No! That's works fine. If I press the reload button, the
remaining
time will change or the power-supply status will be updated.
> If K-acpi does not update all values open the conf dialog
> and press the OK -Button.
I've done this but there are no automatic changes!
> If K-acpi update all values (the AC-adapter is NOT
> connected to the laptop) but k-acpi does not the update
> remaining time then we have a problem. :-(
That's right, I think I / we have a problem ...
> You use Suse 8.0, what Kernel and what
> ACPI-subsystem do you use ?
I'm using SuSe 8.0 with Kernel 2.4.18 with the
acpi-kernel-patches from:
http://www.holik.at/lappy/SuSE80-acpi-20020611_pciirq-2.4.18.diff.gz
> ACPI-subsystem version can you find out with cat
> /proc/acpi/info
version: 20020611
states: S0 S1 S4 S5
cu,
BC
Logged In: YES
user_id=509024
Hi,
>I'm using SuSe 8.0 with Kernel 2.4.18 with the
>acpi-kernel-patches from:
>http://www.holik.at/lappy/SuSE80-acpi-20020611_pciirq-2.4.18.diff.gz
I use with patch too.
Ok, my last idea:
start kacpi, open the conf-dialog, set the update time to 10
sec. Press the apply-button, than the OK-button. Than
close the kacpi the FILE/QUIT. Than restart the app.
If this will not work:
make a cat $HOME/.kde/share/config/kacpirc and send me
an email to jonasge@gmx.net. (i'm german)
cu,
Jonas
Logged In: YES
user_id=339076
Griasde!
> ok, my last idea:
> If this will not work:
No, It won't work ... snief :-(
> make a cat $HOME/.kde/share/config/kacpirc and send me
> an email to jonasge@gmx.net.
O.K. I'll do that!
> (i'm german)
Upps, no problem, I'm BAVARIAN ... ;-))
Pfiade,
BC
Logged In: YES
user_id=509024
It's a BUG in kacpi 0.6pre3.
I will fix it.