Menu
▾
▴
Re: [JPP-Devel] PrinterPlugIn (for Michael, Pepe and Ede)
|
From: Geoffrey R. <ge...@ca...> - 2011-07-15 00:45:17
|
Dear All helpers! I will take on board the new/updated language files. I am a little reluctant to go to SVN - new skills for me to learn! Geoff On 14/07/2011 7:02 PM, Giuseppe Aruta wrote: > OK, > here are Italian and Spanish language files. > I will probabily work around Spanish translation for vertex plugin for > next days, too > > Giuseppe > > --- *Gio 14/7/11, Giuseppe Aruta /<giu...@ya...>/* ha scritto: > > > Da: Giuseppe Aruta <giu...@ya...> > Oggetto: Re: [JPP-Devel] PrinterPlugIn (for Michael > A: "OpenJump develop and use" <jum...@li...> > Data: Giovedì 14 luglio 2011, 12:28 > > Hi Geoff, > today I will send you the translation of your plugin in Spanish > nad some corrections for Italian too. Before new realize > > Giuseppe > > --- *Gio 14/7/11, Michaël Michaud /<mic...@fr...>/* ha > scritto: > > > Da: Michaël Michaud <mic...@fr...> > Oggetto: Re: [JPP-Devel] PrinterPlugIn (for Michael > A: "OpenJump develop and use" > <jum...@li...> > Data: Giovedì 14 luglio 2011, 12:22 > > Hi Geoffrey, > >> OK, when you are happy that there are no more bugs I will >> release the new version (and code) > Thanks, it works fine for me now. > > Later, I'll send you a language file for vertex plugin, but > this is another jar, so this is just for information. > > Thanks for all, > > Regards > > Michaël > > > >> >> Geoff >> >> On 14/07/2011 4:11 AM, Michaël Michaud wrote: >>> Hi, Geoffrey >>> >>> Thanks a lot for all your efforts, >>> >>> I'll test your improvements soon and let you know. >>> >>> Michaël >>>> Dear Michael >>>> >>>> Thanks for the feedback. I am attaching revised version: >>>> >>>> 1. The problem with the number format could be solved >>>> nicely with some effort, but I have simply removed the >>>> grouping separator (a comma in English). There is >>>> obviously a problem with European decimal formats. I >>>> think this is the problem, please test again. >>>> 2. The titles for the various renderers have changed over >>>> time - also their "meaning". In earlier attempts I was >>>> testing 4 different renders that were called "Quality" >>>> "Accurate" etc, but these have been replaced by three >>>> "ISA, Core and External" - with the user to decide >>>> which gives the best results. >>>> 3. I now understand your problem with the name of the JAR >>>> - yes it cannot be changed without changing the code. >>>> Again this can be fixed, but I do not have the time at >>>> the moment. >>>> 4. The typo in the language files fixed >>>> 5. A new French language file installed. >>>> >>>> Hope this is now OK for you. >>>> >>>> regards >>>> >>>> Geoff >>>> >>>> On 11/07/2011 6:29 AM, Michaël Michaud wrote: >>>>> Hi Geoff, >>>>> >>>>> Thanks a lot for improvements ! >>>>> >>>>>> 1. The scale field now checks for numeric values with >>>>>> spaces, and attempts to resolve a reasonable number, >>>>>> so "1 234" and "1,234" converts to "1234". Please >>>>>> let me know if this causes any other problems with >>>>>> your decimal point/separator values. >>>>>> >>>> >>>>> This one is not fixed for me. To reproduce the problem, >>>>> set locale to french/France, open the main printer dialog >>>>> (I get a scale of "2 897" for example), and click in the >>>>> "fit to page" checkbox. >>>>> I get an "Error in the scale field" error. >>>>> If I change to english/Australia locale, I get the scale >>>>> as 2,897 (instead of 2 897) and there is no more error. >>>>> If I manually change 2 897 to 2897, It also works fine. >>>>> Maybe this example can help : >>>>> http://www.exampledepot.com/egs/java.text/Numbers.html >>>>>> >>>>>> 1. The <Window Close> button now operates the same as >>>>>> the <Cancel> button. >>>>>> >>>>> Fixed, thanks. >>>>>> >>>>>> 1. PrinterPlugin tooltip is now internationalized >>>>>> >>>>> Fixed, thanks. >>>>>> >>>>>> 1. The title of the <About> dialog is now internationalized. >>>>>> >>>>> Fixed, thanks >>>>>> >>>>>> 1. The "Quality" word in the Help dialog should simply >>>>>> be removed from the language file >>>>>> (JumpPrinter.HelpDialog.Message7). In English I have >>>>>> changed this to "Options ....". I have not changed >>>>>> the other language files. >>>>>> >>>>> OK, what I meant was that "Precision" and "Quality words >>>>> used in "JumpPrinter.Setup.Quality" and >>>>> "JumpPrinter.Setup.Message7" were probably refering to old >>>>> PrinterSetUp >>>>> String [] qualityItems = {"OJ Quality Renderer", "OJ >>>>> Accurate Renderer", "External Renderer","SkyJump Renderer"}; >>>>> but make less sens for the user now that renderer are called >>>>> String [] qualityItems = {"ISA Renderer", "Core Renderer", >>>>> "External Renderer"}; >>>>> Not sure if terms Precision/Quality must be removed from >>>>> language file or add to renderer names... >>>>> >>>>>> 1. [..] around "Furniture" in Help dialog now corrected. >>>>>> >>>>> Fixed, thanks >>>>>> >>>>>> 1. Save Image dialog, "Size" is now internationalised >>>>>> >>>>> Fixed, thanks >>>>>> >>>>>> 1. Your French language file is now included in the jar >>>>>> >>>>> Great, thanks >>>>>> >>>>>> 1. <Note> Panel -- and ++ buttons are now >>>>>> internationalised, In English I have named these >>>>>> "Del" and "Add". I have attempted the translation >>>>>> into Italian, German and French (excuse my poor >>>>>> language skills). Note that the layout of the dialog >>>>>> is sensitive to word length - but you can always put >>>>>> "--" and "++" in the language file. >>>>>> >>>>> Fine, thanks >>>>>> >>>>>> 1. The package com.cadplan.fileio was in both jars (this >>>>>> is not good - I know). Generally it did not cause >>>>>> problems - but!!! For JumpPrinter I have renamed >>>>>> this package to com.cadplan.fileioA - this should >>>>>> solve the problem for the moment. >>>>>> >>>>> Sorry for my bad diagnosis. The problem is still there (if >>>>> I change the jar name to JumpPrinter-1.77.jar, I get an >>>>> exception). >>>>> Now, I think this is because application name in >>>>> PrinterPlugIn... >>>>> //PrinterPlugIn >>>>> IconLoader loader = new IconLoader(dirName,"JumpPrinter"); >>>>> // is used as jarname in IconLoader >>>>> filename = >>>>> "jar:file:"+wd+"/"+appName+".jar!/"+"Resources/"+name; >>>>> >>>>> OK, this problem is not a big issue as I have not to >>>>> rename the jar file >>>>> Just let you know why I could not do it and let you decide >>>>> if it is worthwhile fixing it. >>>>> >>>>> Also there is a typo in language file with the key >>>>> JumPrinter.OkToPrint which should be JumpPrinter.OkToPrint >>>>> (with 2 'p') as in the source code >>>>> >>>>> Attached, the french file with a few typo fixed. >>>>> >>>>> Best regards, >>>>> >>>>> Michaël >>>>>> >>>>>> Please let me know how you get on. >>>>>> >>>>>> thanks >>>>>> >>>>>> Geoff >>>>>> >>>>>> >>>>>> >>>>>> On 3/07/2011 6:34 PM, Michaël Michaud wrote: >>>>>>> Hi Geoff, >>>>>>> >>>>>>> I just have translated PrinterPlugIn to french. >>>>>>> Please find the properties file attached to this mail. >>>>>>> I'm on the way of including it in OpenJUMP 1.4.1-s >>>>>>> distribution. >>>>>>> >>>>>>> It gave me the occasion to appreciate the excellent work >>>>>>> you did for this plugin. >>>>>>> I realized that I did not know 10% of its capabilities >>>>>>> :-) . >>>>>>> >>>>>>> Here are a few points where, in my opinion, it coud be >>>>>>> improved : >>>>>>> >>>>>>> The only bug I found is related to the scale displayed >>>>>>> in the main menu. >>>>>>> When the dialog is opened, displayed scale number uses >>>>>>> the local (ex. Scale 1: 2 983 with my french >>>>>>> configuration), >>>>>>> but it cannot read it back because of the space between >>>>>>> thousands and units. >>>>>>> It throws the same error as when a bad number is >>>>>>> manually entered. >>>>>>> >>>>>>> The cancel button of the main dialog works fine (simply >>>>>>> closes the dialog box) >>>>>>> I would have expected the same behaviour when I use the >>>>>>> dialog close button (upper right corner), >>>>>>> but instead, it opens the Printer dialog box. >>>>>>> >>>>>>> Other remarks are small ui improvement suggestions >>>>>>> (sorry if I missed some points) : >>>>>>> - PrinterPlugIn button tooltip is not yet internationalized >>>>>>> - Button "About" is internationalized, but not About >>>>>>> dialog box title >>>>>>> - Renderer chooser is refered as "Quality" option in the >>>>>>> Help dialog box, but has no title in the main >>>>>>> configuration dialog box >>>>>>> - In the Help dialog, brackets around Furniture Dialog >>>>>>> are not closed >>>>>>> - In the Save Image dialog box, "size" option is not >>>>>>> internationalized >>>>>>> - IMO, in Note panel of Furniture dialog box, an >>>>>>> Add/Remove internationalized button would be better than >>>>>>> -- and ++ >>>>>>> >>>>>>> Thanks again for this excellent plugin. >>>>>>> >>>>>>> Michaël >>>>>>> >>>>>>> >>>>>>> ------------------------------------------------------------------------------ >>>>>>> All of the data generated in your IT infrastructure is seriously valuable. >>>>>>> Why? It contains a definitive record of application performance, security >>>>>>> threats, fraudulent activity, and more. Splunk takes this data and makes >>>>>>> sense of it. IT sense. And common sense. >>>>>>> http://p.sf.net/sfu/splunk-d2d-c2 >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Jump-pilot-devel mailing list >>>>>>> Jum...@li... >>>>>>> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel >>>>>>> >>>>>>> >>>>>>> ----- >>>>>>> No virus found in this message. >>>>>>> Checked by AVG -www.avg.com <http://www.avg.com> >>>>>>> Version: 10.0.1388 / Virus Database: 1516/3741 - Release Date: 07/03/11 >>>>>> >>>>>> -- >>>>>> Dr Geoffrey G Roy >>>>>> Cadplan >>>>>> 129 Gloster Street, Subiaco WA 6008 >>>>>> Tel: (08) 9381 4870 Fax: (08) 9382 4459 >>>>>> Email:ge...@ca... >>>>>> http://www.cadplan.com.au >>>>>> >>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> All of the data generated in your IT infrastructure is seriously valuable. >>>>>> Why? It contains a definitive record of application performance, security >>>>>> threats, fraudulent activity, and more. Splunk takes this data and makes >>>>>> sense of it. IT sense. And common sense. >>>>>> http://p.sf.net/sfu/splunk-d2d-c2 >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Jump-pilot-devel mailing list >>>>>> Jum...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel >>>>> >>>>> >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> All of the data generated in your IT infrastructure is seriously valuable. >>>>> Why? It contains a definitive record of application performance, security >>>>> threats, fraudulent activity, and more. Splunk takes this data and makes >>>>> sense of it. IT sense. And common sense. >>>>> http://p.sf.net/sfu/splunk-d2d-c2 >>>>> >>>>> >>>>> _______________________________________________ >>>>> Jump-pilot-devel mailing list >>>>> Jum...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel >>>>> >>>>> >>>>> No virus found in this message. >>>>> Checked by AVG - www.avg.com <http://www.avg.com> >>>>> Version: 10.0.1388 / Virus Database: 1516/3757 - Release >>>>> Date: 07/10/11 >>>>> >>>> >>>> -- >>>> Dr Geoffrey G Roy >>>> Cadplan >>>> 129 Gloster Street, Subiaco WA 6008 >>>> Tel: (08) 9381 4870 Fax: (08) 9382 4459 >>>> Email:ge...@ca... >>>> http://www.cadplan.com.au >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> All of the data generated in your IT infrastructure is seriously valuable. >>>> Why? It contains a definitive record of application performance, security >>>> threats, fraudulent activity, and more. Splunk takes this data and makes >>>> sense of it. IT sense. And common sense. >>>> http://p.sf.net/sfu/splunk-d2d-c2 >>>> >>>> >>>> _______________________________________________ >>>> Jump-pilot-devel mailing list >>>> Jum...@li... >>>> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel >>> >>> >>> >>> ------------------------------------------------------------------------------ >>> AppSumo Presents a FREE Video for the SourceForge Community by Eric >>> Ries, the creator of the Lean Startup Methodology on "Lean Startup >>> Secrets Revealed." This video shows you how to validate your ideas, >>> optimize your ideas and identify your business strategy. >>> http://p.sf.net/sfu/appsumosfdev2dev >>> >>> >>> _______________________________________________ >>> Jump-pilot-devel mailing list >>> Jum...@li... >>> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel >>> >>> >>> No virus found in this message. >>> Checked by AVG - www.avg.com <http://www.avg.com> >>> Version: 10.0.1390 / Virus Database: 1516/3763 - Release >>> Date: 07/13/11 >>> >> >> -- >> Dr Geoffrey G Roy >> Cadplan >> 129 Gloster Street, Subiaco WA 6008 >> Tel: (08) 9381 4870 Fax: (08) 9382 4459 >> Email:ge...@ca... >> http://www.cadplan.com.au >> >> >> ------------------------------------------------------------------------------ >> AppSumo Presents a FREE Video for the SourceForge Community by Eric >> Ries, the creator of the Lean Startup Methodology on "Lean Startup >> Secrets Revealed." This video shows you how to validate your ideas, >> optimize your ideas and identify your business strategy. >> http://p.sf.net/sfu/appsumosfdev2dev >> >> >> _______________________________________________ >> Jump-pilot-devel mailing list >> Jum...@li... >> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > > > -----Segue allegato----- > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by > Eric > Ries, the creator of the Lean Startup Methodology on "Lean > Startup > Secrets Revealed." This video shows you how to validate your > ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > > -----Segue allegato----- > > _______________________________________________ > Jump-pilot-devel mailing list > Jum...@li... > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > > > -----Segue allegato----- > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > > -----Segue allegato----- > > _______________________________________________ > Jump-pilot-devel mailing list > Jum...@li... > </mc/compose?to=Jum...@li...> > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > > > > ------------------------------------------------------------------------------ > AppSumo Presents a FREE Video for the SourceForge Community by Eric > Ries, the creator of the Lean Startup Methodology on "Lean Startup > Secrets Revealed." This video shows you how to validate your ideas, > optimize your ideas and identify your business strategy. > http://p.sf.net/sfu/appsumosfdev2dev > > > _______________________________________________ > Jump-pilot-devel mailing list > Jum...@li... > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > > > No virus found in this message. > Checked by AVG - www.avg.com <http://www.avg.com> > Version: 10.0.1390 / Virus Database: 1516/3764 - Release Date: 07/14/11 > -- Dr Geoffrey G Roy Cadplan 129 Gloster Street, Subiaco WA 6008 Tel: (08) 9381 4870 Fax: (08) 9382 4459 Email: ge...@ca... http://www.cadplan.com.au |