Re: [Jmri-developers] First 4.13.6 files available

[Balazs R. <bal...@gm...>]

Seems to work fine for OpenLCB stuff.

I found a bunch of ConcurrentModificationExceptions when deleting sensors
from the sensor table. Filed https://github.com/JMRI/JMRI/issues/6254 to
track it.


On Thu, Dec 6, 2018 at 4:59 PM Klaus Killinger <kla...@t-...>
wrote:

> Yes, it used to work for me pre-4.13.6. I have a local repository
> 4.13.6ish (I think it is from 21 November 2018) where it works.
>
> I have to switch the Preferences >> Defaults from "Z21" to "Internal".
>
> Klaus
>
>
> Am 06.12.2018 um 11:29 schrieb Bob Jacobsen via Jmri-developers:
> >
> >
> >> On Dec 6, 2018, at 12:48 AM, Klaus Killinger <
> kla...@t-...> wrote:
> >>
> >> Windows 7, PanelPro 4.13.6+R828995c
> >>
> >> 1) Create a new profile
> >> PanelPro Quit and restart
> >> 2) Configure connection
> >> System manufacturer = Roco
> >> System connection = Z21 Simulator
> >> Save and Restart
> >> 3) Tools >> Throttles >> New Throttle >> Enter Address 3 >> Set
> >> After some seconds a window "Failed to create Throttle" shows up,
> saying "Failed to get response from command station"
> >>
> >> All defaults are set to "Z21". I didn't change it.
> >> I'm able to create a JMRI throttle in other simulator modes.
> >
> > Thanks for the additional detail.  I really, really don’t understand the
> Z21 code; it looks to me like it doesn’t create a simulated throttle under
> Z21, but instead in the other two (!) connections that it creates. If I
> change the default throttle to i.e. Z21XpressNet it seems to work:
> >
> >
> >
> > So this is a problem, but it doesn’t seem to be a new problem.
> >
> > Did it used to work for you pre-4.13.6? If so, was that because the
> Internal throttle was being automatically selected as default?
> >
> > it would be a reasonable thing to add a simulated throttle to Z21, like
> many other systems have, but I don’t understand that code well enough to be
> able to do it.
> >
> > Bob
> > --
> > Bob Jacobsen
> > jac...@ma... +1-510-708-5988 AIM, Skype JacobsenRG
> >
> >
> >
> >
> > _______________________________________________
> > Jmri-developers mailing list
> > Jmr...@li...
> > https://lists.sourceforge.net/lists/listinfo/jmri-developers
> >
> _______________________________________________
> Jmri-developers mailing list
> Jmr...@li...
> https://lists.sourceforge.net/lists/listinfo/jmri-developers
>