From: Bob J. <jac...@us...> - 2008-05-31 05:01:12
|
Update of /cvsroot/jmri/help/en/html/hardware/loconet In directory sc8-pr-cvs17.sourceforge.net:/tmp/cvs-serv3506/html/hardware/loconet Modified Files: Digitrax.shtml Log Message: add PR3. Reorganize a little Index: Digitrax.shtml =================================================================== RCS file: /cvsroot/jmri/help/en/html/hardware/loconet/Digitrax.shtml,v retrieving revision 1.3 retrieving revision 1.4 diff -C2 -d -r1.3 -r1.4 *** Digitrax.shtml 2 Apr 2008 16:16:43 -0000 1.3 --- Digitrax.shtml 31 May 2008 05:01:06 -0000 1.4 *************** *** 24,35 **** <div id="mainContent"> ! <h1> ! JMRI Hardware Guide: Digitrax DCC ! </h1> ! <h2>Supported Command Stations</h2> ! <p>DecoderPro works with your Digitrax command station to program decoders. To do this, it communicates with the command station over the LocoNet using one of several types of LocoNet adapter.</p> <P>DecoderPro will work with all the following command stations:</p> <ul> --- 24,38 ---- <div id="mainContent"> ! <h1> ! JMRI Hardware Guide: Digitrax DCC ! </h1> ! <h2>LocoNet Connections</h2> ! ! <p>JMRI, including DecoderPro and PanelPro, ! works with your Digitrax command station to program decoders. To do this, it communicates with the command station over the LocoNet using one of several types of LocoNet adapter.</p> + <P>DecoderPro will work with all the following command stations:</p> <ul> *************** *** 42,69 **** <li>DCS200 Command Station/Booster</li> <li><a href="http://www.uhlenbrock.de/3/index.htm">Intellibox: The Uhlenbrock Central Unit</a></li> </ul> <P>To connect your computer to the LocoNet, and hence to the command station, you need one of the following adapters:</P> <li><a href="LocoBufferUSB.shtml">LocoBuffer-USB</a></li> <li><a href="LocoBufferII.shtml">LocoBuffer II</a></li> <li><a href="LocoBuffer.shtml">LocoBuffer</a></li> <li><a href="MS100.shtml">MS-100</a></li> </ul> <P>Generally, any of these can be used with any type of computer ! to communicate with any type of command station. It is strongly ! recommended, however, that you use a LocoBuffer-style device in preference ! to an MS100. The MS100 does not provide reliable communications, and cannot be used with JMRI if you are using MacOS X or on most Windows Vista machines. ! <p> ! DecoderPro can also use a ! <a href="PR2.shtml">Digitrax PR2</a> to program and test decoders. The PR2 is a stand-alone unit which does not connect to the rest of the layout, the command station, nor to a LocoNet. For more information on using a PR2 with DecoderPro, please see the ! <a href="PR2.shtml">PR2 setup page</a>. <h2>Setup</h2> --- 45,84 ---- <li>DCS200 Command Station/Booster</li> <li><a href="http://www.uhlenbrock.de/3/index.htm">Intellibox: The Uhlenbrock Central Unit</a></li> + <li>LocoBuffer (PS): LocoBuffer with built-in command station </ul> <P>To connect your computer to the LocoNet, and hence to the command station, you need one of the following adapters:</P> + <ul> <li><a href="LocoBufferUSB.shtml">LocoBuffer-USB</a></li> + <li><a href="PR3.shtml">PR3</a></li> <li><a href="LocoBufferII.shtml">LocoBuffer II</a></li> <li><a href="LocoBuffer.shtml">LocoBuffer</a></li> <li><a href="MS100.shtml">MS-100</a></li> </ul> + <P>Generally, any of these can be used with any type of computer ! to communicate with any type of command station. ! Currently, the LocoBuffer-USB and PR3 are the recommended solutions. ! The LocoBuffer II and original LocoBuffer are no longer being ! actively produced; their only advantage now is that they use a ! traditional serial port rather than USB. ! The MS100 is not recommended; it sometimes fails to provide reliable communications, and cannot be used with JMRI if you are using MacOS X or on most Windows Vista machines. ! <h2>PR2 and PR3 Programmers</h2> ! JMRI can also use a ! <a href="PR2.shtml">Digitrax PR2</a> or ! <a href="PR3.shtml">PR3</a> ! to program and test decoders. The PR2 is a stand-alone unit which does not connect to the rest of the layout, the command station, nor to a LocoNet. For more information on using a PR2 with DecoderPro, please see the ! <a href="PR2.shtml">PR2 setup page</a>. The PR3 can either ! serve as an interface (see above) or as a standalone programmer. ! There is more information on the ! <a href="PR3.shtml">PR3 setup page</a>. <h2>Setup</h2> |