|
From: Ruud H. <R....@sy...> - 2005-09-14 07:14:05
|
The windows version also has Syslog processing, see the 'Windows Syslog Install Guide' included in the package. regards Ruud Javier wrote: Daniel, You should look at one of the demos or the screenshots on the jffnms webs= ite. If you plan to install JFFNMS in Linux, it will have all the features, th= e=20 Windows version does not have Tacacs and Syslog processing. Since JFFNMS SNMP support comes from PHP, and PHP supports SNMPv3 in Linu= x and=20 on Windows, then it will work. Javier Daniel Sitton wrote: > will it work well with snmpv3 i can't see how it wouldn't since it's on= =20 > a linux box. Also the bandwidth monitoring, is it pretty easy to read?= =20 > My bosses use mrtg quite a bit. and some of the bean counters.=20 > =20 > Daniel Sitton <>< > Network Engineer > Austin Bank > 903 871 2527 > ds...@au... <mailto:ds...@au...> > =20 > How wonderful it is that nobody need wait a single moment before=20 > starting to improve the world. > -Anne Frank >=20 > >>> falz <dar...@gm...> 9/13/2005 4:12 PM >>> > Yep, JFFNMS will do what you want. It monitors most stuff using SNMP, > so it can monitor all of your cisco stuff, including windows boxes if > you have SNMP installed on 'em (disk drive space, cpu load, etc etc). >=20 > I've never attempted to install it on windows, but apparently it's poss= ible. >=20 > --falz >=20 > On 9/13/05, Daniel Sitton <ds...@au...> wrote: > >=20 > > I am using mrtg to watch the bandwidth on the T1's at each of my=20 > locations. > > Jffnms will do this won't it? > > =20 > > Also is there any benefits to jffnms over nagios, opennms?=20 > > =20 > > I am in a strictly windows shop and the only one who knows anything = about > > linux or wants to. I wanted to use jffnms to monitor my routers and= =20 > use the > > syslog and tacacs capabilities. I'd appreciate any information to=20 > make an > > informed decision on what to do.=20 > > =20 > > We've got what's up gold monitoring all the network equipment but th= at's > > going to be useless for my routers when I upgrade to snmpv3. Thanks= =20 > for any > > help.=20 > > =20 > > Daniel Sitton <>< > > Network Engineer > > Austin Bank > > 903 871 2527 > > ds...@au... > > =20 > > How wonderful it is that nobody need wait a single moment before=20 > starting to > > improve the world. > > -Anne Frank |