From: kevin t. <nuf...@ya...> - 2003-09-05 16:53:05
|
I've not had time to look into this, but if you stop by the IRC channel (see FAQ) i may be able to help you there. It can likely be fixed with some msp3400 options -tmk --- Bruno Hertz <br...@ya...> wrote: > > On Wed, 2003-09-03 at 15:45, Bruno Hertz wrote: > > I get always mono sound, no matter what channel I > tune > > in. > > I'm afraid I'm positive, no stereo sound sound at > all. > Checked this with 2.6.0-test4 as well as with RH9 > default > kernel. > > Can't believe this is a card or chipset issue. I'm > talking > Switzerland cable tv, and a google web/usenet search > on pvr > cards and stereo problems returns nothing safe some > ivtv > mailing list postings. > > Below my msp log entries. Could somebody with > working stereo, > possibly in PAL country, please post their > corresponding > msp log, possibly with debug=2 ? Maybe it gives me a > clue what > the problem might be. > > Thanks in advance, Bruno > > > (1) During module load/intialization > > msp34xx: setvolume: mute=off 59343:59343 v=0x73 > b=0x00 > msp34xx: init: chip=MSP3418W-A2, has NICAM support > msp3410: daemon started > msp3410: setting mode: 4.5 M BTSC-Stereo (0x0020) > msp3410: current mode: 4.5 M BTSC-Stereo (0x0020) > msp3400: BTSC setstereo: stereo > msp3400: setstereo final source/matrix = 0x320 > msp34xx: setbass: 32768 0x00 > msp34xx: settreble: 32768 0x00 > msp34xx: setvolume: mute=off 59343:59343 v=0x73 > b=0x00 > msp3410: status=0x6 (pri=no, sec=no, mono) > msp34xx: watch: stereo 2 => 1 > msp3400: BTSC setstereo: mono > msp3400: setstereo final source/matrix = 0x300 > msp34xx: scart switch: in1 da => 1 > > (2) Setting PAL via test_ioctl -d $device -u 0xff > This obviously gives an error since no channel > is tuned in yet > > msp34xx: switching to TV mode > msp34xx: setvolume: mute=off 0:0 v=0x00 b=0x00 > msp3410: setting mode: autodetect start (0x0001) > msp3410: detection still in progress > msp3410: detection still in progress > msp3410: current mode: ERROR (0x0000) > msp34xx: setbass: 32768 0x00 > msp34xx: settreble: 32768 0x00 > msp34xx: setvolume: mute=off 59343:59343 v=0x73 > b=0x00 > > (3) Tuning to a channel with stereo sound via > ptune.pl > > msp34xx: scart switch: mute => 1 > msp34xx: scart switch: in1 da => 1 > msp34xx: scart switch: in1 da => 1 > msp34xx: scart switch: in2 => 1 > msp3410: status=0x6 (pri=no, sec=no, mono) > msp34xx: setvolume: mute=off 59343:59343 v=0x73 > b=0x00 > msp34xx: setbass: 32768 0x00 > msp34xx: settreble: 32768 0x00 > msp3400: BTSC setstereo: mono > msp3400: setstereo final source/matrix = 0x300 > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > ivtv-devel mailing list > ivt...@li... > https://lists.sourceforge.net/lists/listinfo/ivtv-devel __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com |