From: Ming Z. <mi...@el...> - 2004-09-30 18:46:05
|
it is strange that u initiator tries to connect all targets unless u let it to connect all. which iscsi initiator u use? ming On Thu, 2004-09-30 at 13:59, Alvin Starr wrote: > I have an iscsi target system that exports/shares/presents a number of > target devices. > my config looks like this: > > Target iqn.2001-04.net.iplink:d1.sys-001.iplink.net > User suser1 xxx > Lun 0 /dev/Volume00/root-img-sys-001 > Alias sys-001 > MaxConnections 1 > Target iqn.2001-04.net.iplink:d1.sys-002.iplink.net > User user2 xxx > Lun 0 /dev/Volume00/root-img-sys-002 > Alias sys-001 > MaxConnections 1 > Target iqn.2001-04.net.iplink:d1.sys-003.iplink.net > User user3 xxx > Lun 0 /dev/Volume00/root-img-sys-003 > Alias sys-003 > MaxConnections 1 > > My initiators will connect to the one target they have the > username/password to but will keep throwing errors for the other two > targets. > The errors complain about authentication errors and this makes sense > since they don't have the username/passwrod for the other targets. > I want to make these errors go away since they keep showing up once a > second or so. > > Is there a way on either the target or the initiator to make this > problem go away? -- -------------------------------------------------- | Ming Zhang, PhD. Student | Dept. of Electrical & Computer Engineering | College of Engineering | University of Rhode Island | Kingston RI. 02881 | e-mail: mingz at ele.uri.edu | Tel. (401) 874-2293 | Fax. (401) 782-6422 | http://www.ele.uri.edu/~mingz/ | http://crab.ele.uri.edu/gallery/albums.php -------------------------------------------------- |