Re: [Iscsitarget-devel] success stories with QLA4010C ?

[Ming Z. <mi...@el...>]

unfortunately, i can not crash my iet under kgdb kernel. will try this
when somebody report crash again.

ming

On Mon, 2004-09-27 at 10:02, Ming Zhang wrote:
> i forget to mention that i meet same crash after running iometer for 5
> minutes. i am still checking.
> 
> ming
> 
> On Mon, 2004-09-27 at 09:52, Ming Zhang wrote:
> > Hi, I tried with qla4010c and .34 code. no problem at my side. my
> > ietd.conf
> > 
> > Target iqn.2001-04/com.xyz1
> >         Lun 1 /dev/vg1/lvol1
> >         Wthreads 16
> > 
> > I adjust the Max_outstanding_r2t in sansurf from 1 to 8 for this target.
> > otherwise connection is fail that's all.
> > 
> > check from sansurf, i have immediatedata, datapduinorder and
> > datasequenceinorder all yes.
> > 
> > 
> > Ming
> > 
> > On Thu, 2004-09-23 at 11:31, Andreas Tretau wrote:
> > > 		hi,
> > > I already fiddled about the settings without real progress. I would be
> > > glad if you could have a try next week.
> > > My settings on the target side are below and you could find the negotiated values
> > > in the attachment.
> > > 
> > > 	User root ganzgeheim
> > > Target iqn.2001-04.de.gfz-potsdam:zwerg8.sda_raid1
> > >          User root ganzgeheim
> > >          Lun 0 /dev/sda
> > >          ImmediateData           yes
> > >          DataPDUInOrder          yes
> > >          DataSequenceInOrder     yes
> > >          Alias Test
> > > Target iqn.2001-04.de.gfz-potsdam:zwerg8.sdc_raid1
> > > 	.......
> > > 
> > > 	thanks a lot & bye
> > > 	andy
> > > 
> > > Ming Zhang wrote:
> > > > Hi, i remembered last time when i tried it, i always see log fail. then
> > > > i check the log from that sansurf console and find there are some
> > > > parameters with wrong values. then i changed one by one then ok. u may
> > > > try to see if u get some info there. if not, i can try next week.
> > > >
> > > > 
> > > > 
> > > > On Thu, 2004-09-23 at 10:06, Andreas Tretau wrote:
> > > > 
> > > >>Ming Zhang wrote:
> > > >>###############
> > > >>	Hi,
> > > >>
> > > >>that would be a big help. Please tell me the parameter settings
> > > >>on the target side and necessary changes on the QLA4010 side
> > > >>if you're successful.
> > > >>		bye & thanks a lot in advance
> > > >>		andy
> > > >>
> > > >>
> > > >>>Hi, I successfully ran QLA4010c under windows with iet .32 i guess.
> > > >>>several weeks ago, can not remember.
> > > >>>
> > > >>>i am now out of office and if possible, i can try it with .34 code next
> > > >>>monday.
> > > >>>
> > > >>>ming
> > > >>>
> > > >>>On Thu, 2004-09-23 at 04:34, Andreas Tretau wrote:
> > > >>>
> > > >>>
> > > >>>>		Hi,
> > > >>>>
> > > >>>>anybody out there who's able to work with a QLA4010C under Solaris ?
> > > >>>>	If I use the Cisco iSCSI device driver 3.3.6 [ under solaris on
> > > >>>>the same machine ] it works fine and as expected but a set-up with a
> > > >>>>QLA4010C and the configuration via Qlogic SANsurfer Control IX does'nt work.
> > > >>>>
> > > >>>>	Despite I see a successfull login, parameter negotiation, correct
> > > >>>>targetname , targetid ( 1 and 2 ) and even the  LUN's with the correct size
> > > >>>>- there's no way to connect that LUN's with device entries.
> > > >>>>( And yes, I edited sd.conf and did a devfsadm ).
> > > >>>>
> > > >>>>I observed that the Qlogic SANsurfer Control IX Software
> > > >>>>+ does'nt catch the Aliasname of the target  ( remains  "Not Available" )
> > > >>>>+ does'nt identified ProductID as well as ProductRevision ( remians empty )
> > > >>>>+ does'nt identified Vendor correctly  ( always   "LI" )
> > > >>>>and fit and proper to that a "SDSendScsiInquiryCmdiSCSI returned 1"
> > > >>>>output from the Qlogic SANsurfer Control IX Software.
> > > >>>>
> > > >>>>It happend with the 0.3.3 as well as with the 0.3.4
> > > >>>>
> > > >>>>	any ideas, tips or tricks are highly appreciated !
> > > >>>>	bye andreas
-- 
 --------------------------------------------------
| Ming Zhang, PhD. Student
| Dept. of Electrical & Computer Engineering
| College of Engineering
| University of Rhode Island
| Kingston RI. 02881
| e-mail: mingz at ele.uri.edu
| Tel. (401) 874-2293 
| Fax. (401) 782-6422
| http://www.ele.uri.edu/~mingz/
| http://crab.ele.uri.edu/gallery/albums.php
 --------------------------------------------------