Re: [irda-users] Toshiba M35-S359 - SUCCESS!!

[Srikanth K. <sri...@ro...>]

Thomas,

Providing the acpi kernel parameters did the trick. I
have appended "acpi_irq_balance" and "acp_irq_pci=11"
to kernel line in my grug.conf file. After this, i
have  re-booted the machine, loaded the IrDA stack
then i could successfully sync my palm with jpilot
over IR port. Thanks a lot for you input. However, now
my /proc/interrupts file looks different and i hope i
have not broken anything else.

Thanks again

Srikanth

------------- New /proc/interrupts ---------

          CPU0       
  0:      76563          XT-PIC  timer
  1:        916          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:     534656          XT-PIC  serial
  8:          1          XT-PIC  rtc
  9:         64          XT-PIC  acpi
 10:      46032          XT-PIC  nvidia
 11:      34801          XT-PIC  Toshiba America Info
Systems ToPIC95 PCI to Cardbus Bridge with ZV Support,
usb-uhci, usb-uhci, ehci_hcd, ohci1394, ndiswrapper,
Intel ICH4
 12:         21          XT-PIC  PS/2 Mouse
 14:      11712          XT-PIC  ide0
 15:       1391          XT-PIC  ide1
NMI:          0 
LOC:      76526 
ERR:          0
MIS:          0

-End /proc/interrups -------------------------------

--- Thomas Pinz <tho...@gm...> wrote:
> Hi Srikanth
> 
> > Thanks for the response. I have included various
> > outputs here. Please note that currently,
> tosh-smcinit
> > is set to IRQ 7. I do not use any PCMCIA cards
> > currently. But, i have built-in wireless enabled
> > (using ndiswrapper driver).
> Hmm, i never used the ndiswrapper because i use a
> atheros card. Maybe
> there is a problem
> 
> >           CPU0       
> >   0:    1602565          XT-PIC  timer
> >   1:      11035          XT-PIC  keyboard
> >   2:          0          XT-PIC  cascade
> >   3:      51745          XT-PIC  Toshiba America
> Info
> > Systems ToPIC95 PCI to Cardbus Bridge with ZV
> Support,
> > usb-uhci, ohci1394
> >   4:       4806          XT-PIC  Intel ICH4
> >   7:          0          XT-PIC  ehci_hcd
> >   8:      83786          XT-PIC  rtc
> >   9:        964          XT-PIC  acpi
> 
> Hmm, just a idea.... append the acpi-parameters to
> the commandline of
> the kernel as i wrote in the readme.tom. This result
> that ehci, topic,
> ohci etc all will use irq 11 (or which you say) and
> irq 3 will totaly
> free. then use irq 3 in tosh-smcinit. 
> Does the M35 also have a Parallel Port ? Then i
> would say, use irq 3 for
> irda, maybe the parport will need irq 7 in the
> future...
> 
> cu Thomas
> 
> 
> 
> 
>
-------------------------------------------------------
> This SF.Net email is sponsored by: IBM Linux
> Tutorials
> Free Linux tutorial presented by Daniel Robbins,
> President and CEO of
> GenToo technologies. Learn everything from
> fundamentals to system
>
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> _______________________________________________
> irda-users mailing list
> ird...@li...
>
http://lists.sourceforge.net/lists/listinfo/irda-users


__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com