Re: [Ipmitool-devel] SDR Table on Intel SE7320VP2

[Duncan L. <du...@ic...>]

Argh, sorry for the multiple sends.  Evolution is not behaving well
today and I didn't realize it was sending the entire contents of my
outbox every time I restarted after a crash...

-duncan


On Mon, 2006-06-05 at 15:08 -0700, Duncan Laurie wrote:
> On Tue, 2006-05-30 at 04:49 +0400, Vladimir V. Perepelitsa wrote:
> > 
> > But when I run
> > # ipmitool sdr elist
> > I get only:
> > 
> > Chassis Intru.   | 09h | ns  |  3.0 | Disabled
> > CPU1 12V         | 0Ah | ns  |  7.1 | Disabled
> > Baseboard 1.5V   | 0Ch | ok  |  7.1 | 1.51 Volts
> > Baseboard 3.3V   | 0Dh | ok  |  7.1 | 3.40 Volts
> > Baseboard 5.0V   | 0Eh | ok  |  7.1 | 5.10 Volts
> > Baseboard 12V    | 0Fh | ok  |  7.1 | 12 Volts
> > Baseboard -12V   | 10h | ok  |  7.1 | -11.93 Volts
> > FSB Vtt          | 11h | ns  |  7.1 | Disabled
> > Mem Core 2.5V    | 12h | ns  |  7.1 | Disabled
> > GBit Core 1.2V   | 13h | ok  |  7.1 | 1.19 Volts
> > BB 3.3V Aux      | 14h | ok  |  7.1 | 3.35 Volts
> > Proc1 VCCP       | 15h | ok  |  3.1 |
> > Baseboard Temp   | 17h | ok  |  3.1 | 31 degrees C
> > Proc1 IERR       | 25h | ok  |  3.0 |
> > P1 Thermal Trip  | 27h | ok  |  3.0 |
> > Int Button       | 29h | ok  | 12.0 |
> > ID Button        | 2Ah | ok  | 12.0 |
> > Proc1 Throttle   | 2Bh | ok  |  3.0 | 0 unspecified
> > 
> > But most of all I'm interesting in processor core temperature and
> > processor fans.
> 
> 
> The lack of fan sensors is odd, but the missing Proc2 sensors might be
> because the SDR was loaded when the system only had a single CPU
> installed.  Check with Intel for any BMC firmware updates, particularly
> boot CD or partition to update firmware/SDR and those utilities will
> sometimes scan the system and leave out sensors it does not think are
> connected.
> 
> -duncan
> 
> 
> 
> 
> _______________________________________________
> Ipmitool-devel mailing list
> Ipm...@li...
> https://lists.sourceforge.net/lists/listinfo/ipmitool-devel