Menu
▾
▴
[Ipmitool-devel] Re: works on ibm e325
|
From: Luu, J. <jl...@cd...> - 2004-04-09 10:35:53
|
Ducan, there is also a lan channel check line 471 in file lib/ipmi_lanp.c On this machine, lan channels are 1 and 3. I suspect that channel 3 goes to=20 eth1, I will check. fru (see attached the vvvv output): Builtin FRU device Unknown FRU header version ff. sensor list (see attached the vvvv output) : TMP_S1 | 29.000 | degrees C | ok | 0.000 | 5.000 | 16.000 | 42.000 | 48.000 | 53.000 TMP_S2 | 32.000 | degrees C | ok | 0.000 | 5.000 |=20 16.000 | 42.000 | 48.000 | 53.000 TMP_P1 | 60.000 | degrees C | ok | 2.000 | 7.000 |=20 18.000 | 94.000 | 99.000 | 104.000 TMP_P0 | 61.000 | degrees C | ok | 2.000 | 7.000 |=20 18.000 | 94.000 | 99.000 | 104.000 VLT12 | 12.474 | Volts | ok | 1.008 | 2.016 |=20 3.024 | 13.104 | 14.112 | 15.120 P1Vcpp | 1.548 | Volts | ok | 0.192 | 0.384 |=20 0.576 | 2.496 | 2.688 | 2.880 P1V2.5 | 2.509 | Volts | ok | 0.208 | 0.416 |=20 0.624 | 2.704 | 2.912 | 3.120 VSB5.0 | 5.096 | Volts | ok | 0.416 | 0.832 |=20 1.248 | 5.408 | 5.824 | 6.240 P0Vcpp | 1.536 | Volts | ok | 0.192 | 0.384 |=20 0.576 | 2.496 | 2.688 | 2.880 P0V2.5 | 2.509 | Volts | ok | 0.208 | 0.416 |=20 0.624 | 2.704 | 2.912 | 3.120 VLT5.0 | 5.044 | Volts | ok | 0.416 | 0.832 |=20 1.248 | 5.408 | 5.824 | 6.240 non-linear! non-linear! non-linear! non-linear! non-linear! SEL_CP | 127.000 | messages | ok | 0.000 | 0.000 |=20 0.000 | 96.000 | 117.000 | 240.000 FAN_PW | 0x1 | discrete | 0x0200| na | na |=20 na | na | na | na SCSI_CHG | 0x1 | discrete | 0x0200| na | na |=20 na | na | na | na SCSI_ERR | 0x0 | discrete | 0x0100| na | na |=20 na | na | na | na SEL__CLR | na | discrete | na | na | na |=20 na | na | na | na PWR_DOWN | na | discrete | na | na | na |=20 na | na | na | na BIOS_MEM | na | discrete | na | na | na |=20 na | na | na | na BIOS_PST | na | discrete | na | na | na |=20 na | na | na | na BIOS_CRI | na | discrete | na | na | na |=20 na | na | na | na |