Menu
▾
▴
Re: [Ipmitool-devel] Bridged sensor read doesn't work in 1.8.13, works ok in 1.8.11
|
From: Jim M. <jm...@hp...> - 2013-09-20 23:09:56
|
Z et All, I'm working with Jeff on trying to figure out what is going on with his micro-TCA chassis. Sorry I neglected to include ipmitool-devel on this. FYI: My current thought is that SDR repository indicates that sensors are on channel 0 instead of of where they really reside, on channel 7. I'll let everyone on the list know what we find out. Thanks, Jim On 9/20/2013 1:11 PM, Zdenek Styblik wrote: > On Tue, Sep 17, 2013 at 6:57 PM, Siegel, Jeffrey > <Jef...@sp...> wrote: >> I have a micro-TCA chassis with an MCH made by NAT Gmbh. I use ipmitool over >> LAN to talk to the MCH, and other cards in the chassis. >> >> This command allows me to read the sensor data from the card in slot AMC7: >> >> $ ./ipmitool.exe -H 10.168.0.3 -P "" -T 0x82 -B 0 -t 0x7e -b 7 sensor >> > Hello Jeffrey, > > there were some changes related to bridging. You might want to follow > on those. I can't help you further than that. > > Good luck and best regards, > Z. > > >> For ipmitool version 1.8.11, the output is: >> >> >> >> jsiegel@EAT-DXY4FS1 /cygdrive/c/Users/jsiegel/ipmitool/ipmitool-1.8.11/src >> >> $ ./ipmitool.exe -H 10.168.0.3 -P "" -T 0x82 -B 0 -t 0x7e -b 7 sensor >> >> B3:IPMI Info-1 | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:IPMI Info-2 | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:IPMI Watchdog | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:FRU Agent | 0x0 | discrete | 0x0180| na | na | >> na | na | na | na >> >> B3:Health Error | 0x0 | discrete | 0x0180| na | na | >> na | na | na | na >> >> B3:MMC Reboot | 0x0 | discrete | 0x0180| na | na | >> na | na | na | na >> >> B3:Ver change | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:ModuleHotSwap | 0x0 | discrete | 0x0180| na | na | >> na | na | na | na >> >> B3:IPMBL State | 0x88 | discrete | 0x0880| na | na | >> na | na | na | na >> >> B3:Storage Err | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:Board Reset | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:Temp CPU | 47.000 | degrees C | ok | -10.000 | -7.000 | >> -5.000 | 90.000 | 100.000 | 110.000 >> >> B3:Temp CPU In | 36.000 | degrees C | ok | -10.000 | -7.000 | >> -5.000 | 80.000 | 90.000 | 95.000 >> >> B3:Temp CPU Out | 39.000 | degrees C | ok | -10.000 | -7.000 | >> -5.000 | 90.000 | 100.000 | 105.000 >> >> B3:Temp AMC In | 35.000 | degrees C | ok | -10.000 | -7.000 | >> -5.000 | 70.000 | 80.000 | 85.000 >> >> B3:Temp AMC Out | 42.000 | degrees C | ok | -10.000 | -7.000 | >> -5.000 | 80.000 | 90.000 | 95.000 >> >> B3:Board 3.3vIPM | 3.265 | Volts | ok | na | 3.111 | >> na | na | 3.511 | na >> >> B3:Board 12.0v | 11.977 | Volts | ok | na | 10.738 | >> na | na | 13.393 | na >> >> B3:Board 5.0V | 5.099 | Volts | ok | na | 4.666 | >> na | na | 5.360 | na >> >> B3:Board 3.3V | 3.326 | Volts | ok | na | 3.111 | >> na | na | 3.511 | na >> >> B3:Board 1.8V | 1.823 | Volts | ok | na | 1.686 | >> na | na | 1.931 | na >> >> B3:Board 1.1V | 1.107 | Volts | ok | na | 1.029 | >> na | na | 1.166 | na >> >> B3:Board Vtt0.9V | 0.921 | Volts | ok | na | 0.833 | >> na | na | 0.980 | na >> >> B3:Pwr Good | 0x0 | discrete | 0x979a| na | na | >> na | na | na | na >> >> B3:Pwr Good Evt | 0x0 | discrete | 0x979a| na | na | >> na | na | na | na >> >> B3:CPU Status | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:FWH0 Boot Err | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:FWH1 Boot Err | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:POST Value | 0x0 | discrete | 0x0080| na | na | >> na | na | na | na >> >> B3:Lan Front0 Lk | 0x0 | discrete | 0x0180| na | na | >> na | na | na | na >> >> B3:Lan Front1 Lk | 0x0 | discrete | 0x0180| na | na | >> na | na | na | na >> >> B3:Lan AMC0 Link | 0x0 | discrete | 0x0180| na | na | >> na | na | na | na >> >> B3:Lan AMC1 Link | 0x0 | discrete | 0x0180| na | na | >> na | na | na | na >> >> >> >> For ipmitool version 1.8.12 or 1.8.13, the command no longer works properly: >> >> jsiegel@EAT-DXY4FS1 /cygdrive/c/Users/jsiegel/ipmitool/ipmitool-1.8.13/src >> >> $ ./ipmitool.exe -H 10.168.0.3 -P "" -T 0x82 -B 0 -t 0x7e -b 7 sensor >> >> B3:IPMI Info-1 | na | discrete | na | na | na | >> na | na | na | na >> >> B3:IPMI Info-2 | na | discrete | na | na | na | >> na | na | na | na >> >> B3:IPMI Watchdog | na | discrete | na | na | na | >> na | na | na | na >> >> B3:FRU Agent | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Health Error | na | discrete | na | na | na | >> na | na | na | na >> >> B3:MMC Reboot | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Ver change | na | discrete | na | na | na | >> na | na | na | na >> >> B3:ModuleHotSwap | na | discrete | na | na | na | >> na | na | na | na >> >> B3:IPMBL State | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Storage Err | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Board Reset | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Temp CPU | na | | na | na | na | >> na | na | na | na >> >> B3:Temp CPU In | na | | na | na | na | >> na | na | na | na >> >> B3:Temp CPU Out | na | | na | na | na | >> na | na | na | na >> >> B3:Temp AMC In | na | | na | na | na | >> na | na | na | na >> >> B3:Temp AMC Out | na | | na | na | na | >> na | na | na | na >> >> B3:Board 3.3vIPM | na | | na | na | na | >> na | na | na | na >> >> B3:Board 12.0v | na | | na | na | na | >> na | na | na | na >> >> B3:Board 5.0V | na | | na | na | na | >> na | na | na | na >> >> B3:Board 3.3V | na | | na | na | na | >> na | na | na | na >> >> B3:Board 1.8V | na | | na | na | na | >> na | na | na | na >> >> B3:Board 1.1V | na | | na | na | na | >> na | na | na | na >> >> B3:Board Vtt0.9V | na | | na | na | na | >> na | na | na | na >> >> B3:Pwr Good | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Pwr Good Evt | na | discrete | na | na | na | >> na | na | na | na >> >> B3:CPU Status | na | discrete | na | na | na | >> na | na | na | na >> >> B3:FWH0 Boot Err | na | discrete | na | na | na | >> na | na | na | na >> >> B3:FWH1 Boot Err | na | discrete | na | na | na | >> na | na | na | na >> >> B3:POST Value | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Lan Front0 Lk | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Lan Front1 Lk | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Lan AMC0 Link | na | discrete | na | na | na | >> na | na | na | na >> >> B3:Lan AMC1 Link | na | discrete | na | na | na | >> na | na | na | na >> >> >> >> No sensor values are retrieved. I have taken Wireshark traces of the working >> and non-working conditions and can supply the pcapng files if desired. >> Picking through the packets, it seems the problem is in the request being >> sent: >> >> >> >> Good/Working Request >> >> Data >> >> Tracking: Track Request, Channel: IPMB-L (0x07) >> >> 01.. .... = Tracking: Track Request (0x01) >> >> ..0. .... = Encryption required: False >> >> ...0 .... = Authentication required: False >> >> .... 0111 = Channel: IPMB-L (0x07) >> >> Req, Get Sensor Reading, seq 0x1d >> >> [Response in: 197] >> >> Header: Get Sensor Reading (Request) from 0x20 to 0x7e >> >> Target Address: 0x7e >> >> Target LUN: 0x00, NetFN: Sensor/Event Request (0x04) >> >> .... ..00 = Target LUN: 0x00 >> >> 0001 00.. = NetFn: Sensor/Event Request (0x04) >> >> Header checksum: 0x72 (correct) >> >> Source Address: 0x20 >> >> Source LUN: 0x00, SeqNo: 0x1d >> >> .... ..00 = Source LUN: 0x00 >> >> 0111 01.. = Sequence Number: 0x1d >> >> Command: Get Sensor Reading (0x2d) >> >> Data >> >> Sensor Number: 16 >> >> >> >> Bad/Non-working request >> >> Data >> >> Tracking: Track Request, Channel: Primary IPMB (IPMB-0) >> (0x00) >> >> 01.. .... = Tracking: Track Request (0x01) >> >> ..0. .... = Encryption required: False >> >> ...0 .... = Authentication required: False >> >> .... 0000 = Channel: Primary IPMB (IPMB-0) (0x00) >> >> Req, Get Sensor Reading, seq 0x20 >> >> [No corresponding response] >> >> Header: Get Sensor Reading (Request) from 0x20 to 0x7e >> >> Target Address: 0x7e >> >> Target LUN: 0x00, NetFN: Sensor/Event Request (0x04) >> >> .... ..00 = Target LUN: 0x00 >> >> 0001 00.. = NetFn: Sensor/Event Request (0x04) >> >> Header checksum: 0x72 (correct) >> >> Source Address: 0x20 >> >> Source LUN: 0x00, SeqNo: 0x20 >> >> .... ..00 = Source LUN: 0x00 >> >> 1000 00.. = Sequence Number: 0x20 >> >> Command: Get Sensor Reading (0x2d) >> >> Data >> >> Sensor Number: 16 >> >> >> >> Any suggestions? >> >> >> >> Regards, >> >> Jeff >> >> E-mail confidentiality. >> -------------------------------- >> This e-mail contains confidential and / or privileged information belonging >> to Spirent Communications plc, its affiliates and / or subsidiaries. If you >> are not the intended recipient, you are hereby notified that any disclosure, >> copying, distribution and / or the taking of any action based upon reliance >> on the contents of this transmission is strictly forbidden. If you have >> received this message in error please notify the sender by return e-mail and >> delete it from your system. >> >> Spirent Communications plc >> Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, United >> Kingdom. >> Tel No. +44 (0) 1293 767676 >> Fax No. +44 (0) 1293 767677 >> >> Registered in England Number 470893 >> Registered at Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, >> United Kingdom. >> >> Or if within the US, >> >> Spirent Communications, >> 26750 Agoura Road, Calabasas, CA, 91302, USA. >> Tel No. 1-818-676- 2300 >> >> ------------------------------------------------------------------------------ >> LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99! >> 1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint >> 2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack >> includes >> Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13. >> http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk >> _______________________________________________ >> Ipmitool-devel mailing list >> Ipm...@li... >> https://lists.sourceforge.net/lists/listinfo/ipmitool-devel >> > ------------------------------------------------------------------------------ > LIMITED TIME SALE - Full Year of Microsoft Training For Just $49.99! > 1,500+ hours of tutorials including VisualStudio 2012, Windows 8, SharePoint > 2013, SQL 2012, MVC 4, more. BEST VALUE: New Multi-Library Power Pack includes > Mobile, Cloud, Java, and UX Design. Lowest price ever! Ends 9/20/13. > http://pubads.g.doubleclick.net/gampad/clk?id=58041151&iu=/4140/ostg.clktrk > _______________________________________________ > Ipmitool-devel mailing list > Ipm...@li... > https://lists.sourceforge.net/lists/listinfo/ipmitool-devel > > > -- > --- Jim Mankovich | jm...@hp... (US Mountain Time) --- |